Compressed or pinched by shifting objects or equipment · Bruises, contusions
At a glance
Federal OSHA recorded a severe workplace injury
at Austin Industrial, PBF Refinery, CHALMETTE, LOUISIANA 70043
on — Bruises, contusions, affecting the neck, except internal location of diseases or disorders.
Final narrative
An employee was refueling a compressor when the door on the compressor closed, striking the employee on the hard hat. The employee sustained a neck contusion.
HospitalizedNeck, except internal location of diseases or disordersAir compressors
An employee was climbing down from a carrier deck crane. As the employee was exiting the top of the carrier deck, his boot caught a rope on the outrigger, causing him to fall to the limestone gravel ground 46 inches below and break his left shin.
An employee was walking down the stairs to exit the building, missed the last step, and fell to the floor. The employee sustained a fracture and dislocation of the right tibia and ankle.
An employee was inspecting a flange in the vertical position when their left ring finger got caught between the flange and a bolt resulting in partial amputation of the finger.
An employee was removing metal strapping from a disassembled air-controlled valve when the valve closed and caught the employee's left index finger, which had to be medically amputated.
While descending from a crane's deck platform at approximately 68 inches in height, the employee lost balance and fell to the ground. The employee sustained two fractured ribs and a shoulder sprain.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 811310)
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
An employee was operating a lift truck when it struck a stationary lift truck. His left thumb was pinched between the two lift trucks, resulting in a partial amputation.
An employee was disassembling a pressurized unit using a driver drill. When the unit was disassembled, it caused a kickback from the tube head, causing the drill to strike the employee's left forearm. They sustained a diaphyseal fracture to their left radius and ulna, which required surgery.
After repairing a piece of industrial equipment, an employee had brake-cleaning liquid on his gloves. A lighter ignited the liquid, and the employee's hands were severely burned.
A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.
A security employee was responding to an urgent call from staff regarding a violent patient. The employee tripped and fell on the floor outside of the stairwell. The employee sustained a closed head injury, contusion of the cerebrum without loss of consciousness, and a closed fracture of the distal end of the right radius.
A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.
An employee was walking on a sidewalk and stubbed his toe on an elevated portion of concrete, causing him to trip and fall. The employee's right knee was dislocated.