Caught in running equipment or machinery during maintenance, cleaning · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at QSI, LLC, 1294 N College Street, HUNTSVILLE, ARKANSAS 72740
on — Cuts, lacerations, affecting the hand(s) and arm(s), n.e.c..
Final narrative
At 4:58 p.m. on July 10, 2023, an employee removed a cover on a neck peeler machine to clean meat residue from the machine. A sprocket snagged the employee's jacket and pulled it into the machine, lacerating the employee's left upper arm and hand. The employee was hospitalized.
HospitalizedHand(s) and arm(s), n.e.c.Butchering machinery
On 7/13/2021, at approximately 4:55 PM, an employee was lifting a drain grate to remove a glove from the drain when the grate slipped and fell on his left hand causing the amputation of the left middle finger at the first joint behind the fingernail.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 561720)
An employee was rinsing a food processing machine at a facility and went to stabilize himself. His left hand contacted the surface of the machine and a guard inadvertently closed, crushing the tip of his ring finger and resulting in an amputation and fracture.
An employee was performing janitorial duties on the 15th floor of a building that was under construction. She began having trouble breathing. The employee was hospitalized with lung irritation caused by dust.
On October 17, 2025, an employee was descending a fixed two-step stool when she slipped, landed on her left leg, and suffered a broken femur. She was hospitalized, requiring surgery.
An employee slipped while getting on a trailer. His chin struck the trailer jack, and he suffered fractures to his jawbone and thyroid cartilage. He was hospitalized, requiring surgery.
A crew was finishing work for the day at a job site. An insulated modular panel (IMP) being used as a door fell on an employee. She suffered a dislocated shoulder, a broken arm, and a gash on her left leg. She was hospitalized, requiring surgery for the arm/shoulder injury.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.