Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at ROCKY MOUNTAIN CHOCOLATE FACTORY, INC., 265 TURNER DRIVE, DURANGO, COLORADO 81303
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was unclogging chocolate from a confectionary machine when they contacted the rotating auger. The employee's finger was partially amputated.
AmputationFinger(s), fingernail(s), unspecifiedFood and beverage processing machinery-specialized, n.e.c.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 311351)
An employee had been cleaning red garbage bins (gondolas) near the dock area. The employee tripped and fell off the dock. The employee sustained fractures to an elbow and two ribs, and had bleeding in their lungs.
On June 2, 2025, at approximately 8:45 PM, an employee was taking apart the trayoff belt on a conveyor. While working to remove the roller, the employee's left ring finger was crushed between the roller and the frame of the equipment. The employee sustained a partial fingertip amputation.
An employee was unjamming a hand feed machine in the wrap room. Paper caught the employee's left hand and dragged it into a crimper machine. The employee suffered amputations of the index and middle fingers.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.