Struck against moving part of machinery or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Intex Millwork Solutions, LLC, 45 Mill Street, MAYS LANDING, NEW JERSEY 08330
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was setting up and checking a molder board feed system. He was adjusting the guide fence to ensure the board was in the proper position. As he was pushing the fence, his right hand slipped causing his fingers to contact the rotating head. The employee sustained lacerations on the fingertips of his first two fingers. The right Index fingertip was surgically amputated.
An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.
An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.
An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.
An employee was ripping a 1/2-inch board on a table saw. As the drop piece fell, so did the push stick, and it was pulled into the blade along with the employee's right index finger. The employee's finger was partially amputated. The machine was not guarded at the time of the incident.
An employee was running a piece of wood through a jointer machine. The wood caught and stopped moving, but the employee's left hand kept moving and contacted the blade. The employee suffered a partial amputation to the little finger, below the first knuckle.
An employee was operating a chop saw to cut weather stripping material and suffered amputations to their left thumb and index finger. The employee's middle finger was also lacerated.
An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.
An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.
An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.