Reynolds Consumer Products LLC

At 11:27 a.m. on March 15, 2025, an employee was transferring film to start a new roll when the winder shaft failed to seat properly in its cradle. The employee was knocking the unseated shaft down when his right thumb was caught. The employee sustained an amputation to right thumb.

An employee was loading a roll of corrugate onto a core-winder when the roll fell over striking and fracturing the employee's right leg.

On September 11, 2019, at approximately 10:30 a.m., an employee was dumping a rolling tub of scrap bags when the employee noticed several individual scrap bags remained in the bottom of the scrap tub. The employee reached into the tub to remove the remaining bags. As the employee pushed on the corner of the tub to provide leverage to raise up the scrap tub, the scrap tub tipped sideways, causing the employee to lose balance and fall to the ground. The employee was hospitalized with a right hip fracture.

An employee was removing scrap from the die of a press when the die cycled and sheered off the tip of his left thumb up to his first knuckle.

Employee amputated the tip of his left ring finger while cleaning grease from a small print press roller with the equipment running.

An employee was performing finishing work on a residential driveway when they began to experience body cramps and were hospitalized for heat stress and dehydration.

An employee was staking tomato plants on a farm. The employee began to feel sick and collapsed, suffering from dehydration and heat shock.

An agent was participating in SWAT team selection and was performing various physical fitness skills including running and exercise intervals. The agent experienced dehydration and a muscular injury that required hospitalization.

An employee was traveling back from work when they became ill and experienced dizziness due to heat exhaustion.

On September 26, 2023, an employee was delivering packages when he began to feel ill with a pain in his side. He was hospitalized for heat exhaustion and dehydration.

An employee was painting the inside of a new parts-cleaning machine for electric motors and motor parts when the airborne paint exploded and burned the employee. The employee sustained burns to their neck, lower forearms, and hands.

On December 5, 2023, at approximately 12:30 p.m., a chef was using a kitchen knife to prepare carrots when she suffered a left little fingertip amputation.

An employee was attempting to close a box truck's spring-loaded lift gate platform. When pushing the platform arm down, the platform arm got stuck. When the employee got the arm to go down, it popped back up, amputating his left little finger pad.

An employee was repairing a microwave at a customer's residence when he suffered an electrical shock, which caused burns to both his hands.

Employees were using a pickup truck to move a 16-inch poly pipe across a road. The injured employee was directing traffic. As the pipe pulled parallel to him, it struck his leg, resulting in a broken femur.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.