Fall onto or against object on same level, n.e.c. · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Tyson Poultry, Inc., 5505 JEFFERSON PARKWAY, PINE BLUFF, ARKANSAS 71602
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was washing out an eviscerator machine when the water hose got tangled under the frame of the vacuum pump. As he worked to untangle the hose, he lost balance and started to fall, catching his left hand in the eviscerator. The eviscerator spoon caused an amputation to a finger and ruptured a flexor tendon.
On September 25, 2025, an employee was exiting a yard truck. They slipped and fell approximately 3 feet from the top tread of the steps to the concrete below. The employee sustained a fractured left hip.
An employee was moving a cardboard tote of product using an electric pallet jack. After he turned a corner, he came in contact with a round metal bracket that holds a trash bag mounted to a pole. The pallet jack continued forward and his right hand got caught between the pole and the handle of the jack, resulting in an open fracture and crush injury to his thumb that required hospitalization and surgery.
An employee was removing product from a leg quarter saw with a hook when the hook became jammed. As he was getting the hook free, his right hand came into contact with the saw, which partially amputated his middle finger.
An employee was standing at a workstation, preparing to hang poultry. The employee reached to close a manual air damper for an air vent, which caught their left middle finger as it closed. The employee suffered an amputation to the fingertip.
An employee was waiting for test product to come out of a freezer. While the employee was lowering the basket used to catch the test product, their left little finger was caught between the basket and the side shield on the freezer slide chute, resulting in an amputation to the fingertip.
An employee was on a two-step ladder performing cleaning activities in the de-oiler machine. The employee fell back and his right arm was caught in the equipment, resulting in a right forearm fracture that required surgery.
An employee was changing an insert in the tool head of a CNC machine. The employee had stepped up approximately 28 inches onto the door track of the machine. When the employee went to step back down to the floor, they lost balance and fell backward onto a rack of metal parts. The employee sustained a compression fracture to the spine.
An employee was packaging steel coils on a turntable. As he walked across the turntable, he slipped and fell onto a coil. His left bicep was lacerated by the slit edge of a coil.
An employee was monitoring a lumber-stacking machine when they slipped and fell into an unbanded bundle of lumber. The outer row of lumber then fell on their left leg, fracturing their leg and ankle.
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.
An employee was troubleshooting a thigh deboner on a poultry processing line. As he worked to dislodge a thigh bone caught in the blade mechanism, the machine amputated the first and second digits on his left hand. He was hospitalized.
On September 25, 2025, an employee was exiting a yard truck. They slipped and fell approximately 3 feet from the top tread of the steps to the concrete below. The employee sustained a fractured left hip.
An employee was operating a stand-up forklift, picking product for an order. The forklift struck a metal rack and the employee's left arm was caught between the forklift and the rack. He was hospitalized with a fracture to the neck of his radius and an open fracture to the olecranon (elbow).
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.