Contact with hot objects or substances · Second degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury
at Tyson Foods Inc., 90 Morrison Moore Parkway East, DAHLONEGA, GEORGIA 30533
on — Second degree heat (thermal) burns, affecting the multiple body parts, n.e.c..
Final narrative
An employee was utilizing high-pressure hot water to clear a vacuum line. As they were removing the hose from the vacuum line, the hot water inside the line evacuated rapidly, spraying the employee. They sustained second-degree burns to the torso and forearm.
On September 3, 2025, an employee was leaving a facility at the end of her shift. As she was going through the exit doors of the facility, she tripped on the door seal and fell, resulting in a fractured right hip that required hospitalization and surgery.
An employee was unloading cattle from a pen to the main drive alley. While the employee was inside the pen, a cow rammed her and knocked her down. The employee sustained a contusion to her right upper torso and three fractured ribs.
An employee was operating a blender in the ground beef department when frozen meat became trapped in the blender. The employee was removing the stuck meat when his right ring finger was caught in the machine, resulting in medical amputation of the finger.
An employee was watching as a frozen pipe was being thawed using heated water from a tank. Hot water was discharged from the top of the tank and burned the employee's upper body and face.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 112340)
On July 23, 2025, at 8:00 a.m., an employee was power washing. He went to retrieve a power-washing tip from the machine's fan while it was in operation and the fan blade contacted his right index finger, severing it at the distal joint.
An employee was pulling two separate egg racks when the wheels of the front rack locked, causing the second rack to crush his thumb between both of the racks. The employee sustained an amputation to the tip of the right thumb.
An employee was in the pump room troubleshooting a pump. He unscrewed the top panel of the pump and inadvertently hit the toggle switch that activated the pump. The internal belt caught his right index finger, causing a laceration that resulted in a partial surgical amputation.
An employee was attaching a winch hook to a chick pallet. The winch was activated via remote control and pinched the employee's left index fingertip between the hook and pallet resulting in amputation.
An employee was repairing a water pump on a lawn mower. He replaced the water pump and thermometer and then went to test drive it. The mower started running hot, so he brought it back to the shop and opened the hood on the mower. The radiator overflowed the bottle, the lid blew off, and hot coolant sprayed the employee's face, eyes, and neck. The employee was hospitalized for burns.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.