IFS Coatings Inc.

An employee was investigating an issue with one of the bag houses. While moving powder away from the flip flop valve (air lock), the air lock opened and the flip flop valve closed and amputated a fingertip.

An employee suffered partial amputations to the right first, second, and third digits when her fingers were caught in the rollers of a machine.

An employee locked/tagged out a rotary sieve machine and cleaned it. Afterward, the employee removed the lockout/tagout, then noticed there was still material in the machine. The employee started the machine to push the excess material out and was attempting to clean it again when the employee's right hand contacted the rotary sieve, amputating the index finger.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was operating a shear to cut metal parts when two of their fingers contacted the blade. This resulted in amputation of the left middle and index fingertips.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.

A maintenance employee was climbing a fixed roof access ladder to perform work on an HVAC unit when they fell from the ladder, over the second-floor railing, and onto the stairs below. The total distance of the fall was over 20 feet. The employee suffered multiple fractures that required hospitalization.

At about 8:00 p.m. on September 8, 2025, an employee was cleaning an extruder. While he was brushing built-up powder, his hand brushed the extruder screws. The screws caught his right index finger and amputated about a quarter inch of it.

At about 10:30 a.m. on August 7, 2025, a warehouse technician working for Tnemec Company, Inc., began sweating profusely a half-hour into their shift. The employee was using a forklift to move staged pallets of paint to a shrink-wrapper, shrink-wrap the pallets, and then load the pallets onto a truck using a forklift. The employee became ill about two hours later and was hospitalized for heat-related illness.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.