Facility Management Corporation

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

An employee was inspecting a breaker box and turning on/off a circuit breaker when he was electrocuted.

An employee was on a ladder replacing a net on a basketball hoop. When he took a step up, he lost his balance and the ladder started shaking. The employee went to hang onto the back of the rim but fell. As the employee fell, his leg got caught on the ladder, resulting in a broken leg that required hospitalization and surgery.

A maintenance employee was on an A-frame ladder replacing a ballast light in the locker room. The employee suffered a shock and fell approximately 5-6 feet off the ladder to the floor below. The employee sustained a fractured hip that required hospitalization and surgery.

An employee was participating in a practice session on a tower climbing structure. After reaching the top, the employee quickly descended to the ground. The employee landed on their feet, fell to their knees, and was hospitalized with fractured vertebrae.

An employee was moving equipment as a part of closing duties when the cooler amputated their left index fingertip.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.