Struck by object falling from vehicle or machinery-other than vehicle part · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Kohler Company, 444 Highland Drive, KOHLER, WISCONSIN 53044
on — Fractures, affecting the lower leg(s).
Final narrative
While preparing a core mold for pouring, an employee used a crane and a lifting fixture to flip the mold. As the mold flipped, a 125-pound portion of the mold fell from the flask and landed on the employee's lower right leg, resulting in hospitalization for closed fractures to the tibia and fibula.
An employee was installing a safety emergency horn when he was shocked and fell from the second rung of a 4-foot fiberglass ladder. The employee sustained a fractured left arm.
An employee was aligning a mold with his finger using a hydraulic jack trolley when the valve power brake was pressed which lowered the valve onto the employee's middle finger and amputated the fingertip below the nail.
On July 22, 2018, an employee tripped and fell to the ground while bringing up mushrooms for a price check. The employee suffered a fracture to the left hip, requiring hospitalization.
On 2/19/2016t, at 1:55 AM, an employee was working on a production line when she tripped on an airline, fell, and rolled her right foot/ankle. She was hospitalized and required surgery for a fractured right tibia and fibula.
An employee was operating a spindle machine. The process required 14 bolts, but the employee noticed that there was only 13 bolts. When she tried to put in the 14th bolt, moving parts came down and caught her left-hand pinky finger, amputating the fingertip.
An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.
An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.
An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.
An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.
More severe injuries in this industry (NAICS 332998)
An employee was setting up a test bend on metal tubing when the bender machine clamped onto their right index finger. The fingertip was partially amputated.
An employee was moving packed ware from the end of a conveyor to a pallet using a hoist. As the employee raised the hoist, her left index finger became pinched on the lifting device, resulting in a fingertip amputation.
An employee was welding a tube to a flange when a clamp device closed on her right thumb. The thumb tip was medically amputated above the first knuckle.
An employee was vacuuming above a metal lab. The employee tripped and fell through a guardrail opening, landing 8-10 feet below and suffering possible fractures to the face, wrists, knees, and arms.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.