Contact with hot objects or substances · Second degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury
at KERRY BIOFUNCTIONAL INGREDIENTS, INC., 158 State Highway 320, NORWICH, NEW YORK 13815
on — Second degree heat (thermal) burns, affecting the multiple body parts, n.e.c..
Final narrative
An employee was removing pipe insulation from a hot water line in the hydrolyzed protein alleyway, located approximately 14 feet above ground. The employee was harnessed in the cage of an aerial lift. He was removing insulation from the hot water line when a straw connection malfunctioned and released a stream of 165-degree water. The employee sustained first- and second-degree burns to his chest area, back, and right arm.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 311514)
An employee was preparing for a clean-in-place (CIP) process and removed a cap from a pipe to connect another pipe. Hot water (approximately 170 degrees) splashed onto the employee, causing burns to her hands, left forearm, and both thighs.
An employee was checking an inline magnet. The magnet was placed on a cart next to another magnet and the magnets moved toward each other. The employee's right ring fingertip was caught and amputated.
An employee was walking near a spring-mounted valve when the valve opened. Steam was released and burned the employee's arm, resulting in hospitalization.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.