Cargill AgHorizons

An employee was opening train car hatches on top of a train. The train was backing up to scan the cars in when the employee's foot became stuck. He was then dragged across two rail cars sustaining a concussion and a toe injury.

Two employees were opening lids on railcars to prepare the cars for loading on a track. Both employees were in full body harnesses and were connected by a self-retracting lifeline (SRL) to a rail fall safety system. The train started moving north and the employees realized that the cars were going to move beyond the fall protection coverage and decided to unhook from the rail fall protection. Employee 1 assisted the injured employee and unhooked from the system. As the injured employee attempted to unhook, the SRL ran out of cable, roughly 25 feet from the rail shed. The injured employee was pulled onto his back and remained stationary on his back, held by the SRL cable, as the rail cars moved under him. The employee sustained a laceration and contusion to the top of the head; bruising and scrapes to the lower back, legs and arms; a cut on the right hand; and a bruised thumb.

An employee was opening a train gate for a rail company. Before the employee could open the gate, the train struck the gate which knocked the employee down and rendered him unconscious. The employee sustained fractures to the skull and right eye socket.

An employee was riding on an amusement park's mountain ride. He lost his balance and came partly out of the cart; his arm hit the track and his arm was broken.

On June 4, 2019, a crew was installing fiber across a railroad crossing. A train came through and snagged the fiber. The fiber caught an employee in the neck area and the employee was thrown to the ground. The employee sustained cuts to the head and neck and was hospitalized.

An employee was preparing to unjam an auger shaft while standing on a forklift-elevated, job-made platform. The employee's wrench slipped off the equipment, causing them to lose their balance and fall. The employee landed on the ground 14 feet below and suffered fractures to the orbital bone, left elbow, and lower back.

An employee was walking past a crossover conveyor when a ramp came down and hit them in the back. The employee sustained a broken back vertebra, as well as a concussion, and was hospitalized.

An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.

An employee had been cleaning a grain bin. He walked across the bin and his left foot contacted an unguarded floor auger, resulting in severe lacerations to the foot. The auger was not locked out/tagged out at the time.

On September 23, 2025, an employee was monitoring a feed roller when they tripped and their right hand contacted the roller. The employee was hospitalized and their right hand was amputated at the wrist.

An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.

An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.

An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.