Chobani Idaho, Inc.

An employee was operating a forklift with the mast in the air. The mast contacted an overhead cable (16 feet high), causing the front tires of the forklift to raise off of the pavement. The forklift came to rest unevenly and the employee's foot was crushed. The employee also suffered a hip abrasion.

A maintenance technician was preparing to work on a maturation tank valve. When he opened the valve a caustic chemical splashed him in the face. The employee suffered burns to his eyes and the left side of his face and neck.

An employee was loading cream on a milk truck using a flexible hose when the employee's finger got caught between the handle and body of a plunger valve, resulting in an amputation.

On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.

An employee was examining a machine when a part moved up and amputated a fingertip on their left hand.

An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.

An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.

An employee's right hand was caught in a wire drawing machine, resulting in amputation.

An employee was performing rear brake shoe service on a truck. The employee was using a prybar to remove a spring when the spring slipped from the S-cam and amputated his left index fingertip.

An employee was unjamming a case that was stuck in a case washer machine when their pants became entangled in a chain, causing them to be sprayed with hot water from the machine. They employee suffered burns from the hot water.

An employee was cleaning out a butter fat tank. The employee slipped and fell, suffering a broken right leg.

An employee was clearing a cup jam on a cup conveyor when their left hand was caught between the conveyor and an idler roller located on another conveyor line directly above the jam. The employee received an abrasion and friction burn to the hand that required hospitalization.

An employee was performing routine maintenance on an air valve when their right ring finger became caught in the valve. The employee sustained an amputation to the fingertip.

An employee tripped over a bin and fell to the floor. She landed on her hip and braced herself with her arm, resulting in a fractured hip and wrist.

An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.

An employee was standing on a multi-purpose ladder installing head flashing over a window. Their feet were approximately 6 feet off the ground and three rungs from the top. The employee lost their grip on the drill they were using and the ladder tipped over. The employee fell from the ladder to the ground, resulting in a fractured left wrist, bruised chest, and lacerations to their face and lip.

An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.

An employee was loading a 4-inch wooden door into a pickup truck when he felt a pop in his right side behind his shoulder blade. He was hospitalized later that day and underwent surgery, having suffered a collapsed right lung.