METALS USA

On 2/13/17, an employee was operating a crane and hook to load material onto a truck. When the employee lowered the crane hook to remove a sheet lifter, the employee's right index finger was pinched and amputated within the D-ring.

An employee was cutting rolls of metal on a machine. The employee was on the stairs checking on the rollers when his right leg became caught in the roller and amputated at the ankle.

An employee was unjamming the slitter machine and experienced a crushing injury to a fingertip.

An employee was working from a semi-trailer repositioning a load of steel using an overhead crane. The employee lost his balance and accidently pushed the crane's handheld controls which in turn shifted the load of steel and pinched the injured employee's leg between the steel load and the trailer wall. His right leg was broken.

An employee was struck by a sledge hammer, resulting in injuries to her dentures that required hospitalization and surgery.

An employee working on the line was repositioning the chain with a pry bar. When the chain moved, the pry bar kicked back and struck the employee's eye resulting in possible loss of the eye. The employee was hospitalized and required surgery.

An employee was standing at the sort aisle while sorting packages. Packages rolled down a ramped conveyor belt and a 42-pound package struck the back of the employee's head. The employee sustained a concussion and a broken jaw.

Employees were installing a luffing jib to the end of a crane boom. The employees were lining up four pins when the luffing jib came loose and struck an employee's legs. The employee's left tibia and fibula were fractured.

On October 21, 2025, an employee was operating a saw when a pneumatic clamp caught their right middle finger. The employee suffered a partial amputation to the finger.

An employee completed an end cut on a metal shim and started transferring the metal shim from the saw conveyor to two saw horses in the area. The employee set one end of the shim (7 feet long x 8 inches wide, weighing 218 pounds) on one of the saw horses, then slid the other end onto the other saw horse and the shim fell from the first saw horse. The employee's left index fingertip was pinched between the saw horse and the shim, resulting in a skin avulsion. The fingertip was amputated later.

An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.

An employee was moving steel beams with an overhead crane when the bundle struck a bollard and became unstable. As the employee reached to stop the material from shifting, his thumb was pinched in-between the beams, resulting in a partial amputation.

An employee was rigging a steel joist to be lifted by a crane. The joist fell and pinned the employee against the concrete ground. The employee sustained fractures to multiple ribs, his right arm, right tibia, and an open fracture to his right ankle, as well as a dislocated right hip.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.