Pedestrian struck by vehicle in work zone, unspecified · Dislocation of joints
At a glance
Federal OSHA recorded a severe workplace injury
at HEI Civil, 5460 Montana Vista Way, CASTLE ROCK, COLORADO 80108
on — Dislocation of joints, affecting the knee(s).
Final narrative
An employee was breaking down traffic control equipment on a county road. A car struck the employee, who suffered a right knee dislocation (with soft tissue involvement) and a lacerated left forearm, along with abrasions and other lacerations.
Two employees were installing an 8-inch C-900 watermain pipe. The pipe was shoved home while one of them still had his fingers in it. His left index and middle fingers were caught between two pieces of pipe and the fingertips were amputated.
An employee came up behind a second employee, who was getting parts off a shelf, to put snow down his shirt. The second employee stood up and turned around, which knocked the first employee over. He fell against a tire and broke his right hip.
On November 10, 2023, an employee was flagging and directing temporary traffic controls on a natural gas line replacement project. The employee was struck by a motor vehicle and sustained multiple injuries including an internal tear to an artery, a shoulder injury, and a broken leg.
On November 9, 2023, an employee was picking up cones and equipment from the roadway in a work zone when they were struck by a motor vehicle. The employee sustained a fractured right leg.
A dump truck driver was standing inside a designated work zone while cleaning out the bed of the truck when they were struck by a car and sustained a traumatic brain injury and fractures.
An employee was in the road looking inside a manhole when they were struck by a box truck. The employee sustained injuries to his head, jaw, and pelvis that required hospitalization.
An employee was measuring a piece of concrete that was recently laid. A large pickup truck turned and struck the employee. They sustained fractures to the pelvis and ribs, as well as a punctured and collapsed lung.
More severe injuries in this industry (NAICS 237110)
An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.
On October 7, 2025, employees were conducting trenching operations for the installation of a new sewer line system. The excavator's bucket was detached and put inside the trench as it was being exchanged for a different-sized bucket. An employee entered the trench with a shovel to move some dirt located at the front end of the pipe. The excavator bucket shifted and slid, striking the employee s right foot and trapping it against the ground. The employee sustained a fractured right tibia.
Employees were working to dislodge a large truck that was stuck in a rut using tow straps and a front-end loader with the bucket removed. An employee connected the straps to the loader and truck and another employee slowly engaged the loader to close the coupler. The injured employee's arm became caught in a pinch point. The employee was hospitalized with a fractured arm.
An employee was lifting a piece of 30-inch line stopping equipment using a jack screw. A lifting eye weld snapped and the load dropped. The end of the jack screw then landed on the employee's heel and crushed it. The employee was hospitalized.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.