105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Allegheny Wood Products, Inc.

Contact incidents unspecified · Fractures

Federal OSHA recorded a severe workplace injury at Allegheny Wood Products, Inc., 342 Mill Road, KINGWOOD, WEST VIRGINIA 26537 on — Fractures , affecting the Hand(s) and arm(s) n.e.c..

An employee was performing cleaning duties in the shaker room. The employee was going under a belt line from the chipper to the shaker when their hand and forearm became caught between a return roll and the belt. The employee's left hand/forearm was fractured and the employee was hospitalized.

Hospitalized Hand(s) and arm(s) n.e.c. Logging and wood processing machinery unspecified

Allegheny Wood Products, Inc.

An employee was operating a bundle bander. After applying a band to a bundle of wood, the press was retracting back to its neutral position when the employee's left hand was caught between the press and the frame. The employee was hospitalized with fractured fingers.

Allegheny Wood Products, INC

An employee was cutting a board with a hand saw when the saw kicked back and contacted their left wrist, resulting in a laceration.

Allegheny Wood Products, Inc.

An employee was cruising timber when he tripped on a rock and fell, suffering a broken leg.

Allegheny Wood Products, Inc.

An employee was reaching to reset the drag chain of a conveyor, which was cocked sideways. When the chain was freed, the employee's hand was caught between the chain lug and a piece of metal. The hand was severely lacerated and the employee was hospitalized.

Allegheny Wood Products, Inc.

An employee was replacing a cylinder and shut off the pneumatic pressure and removed the hose to the solenoid to ensure no air was in the system. While taking the top nut off the solenoid bracket, the cant pickup became unstuck and dropped down, catching his arm between the cant pickup and a support beam. The employee suffered a broken right arm.

View Allegheny Wood Products, Inc.'s full OSHA safety record →

HB Fleming, Inc.

A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.

Howard Industries Inc.

An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.

3S Services, LLC

An employee had been cleaning the work area. While lifting a saw, the employee's index finger was lacerated by the saw blade. A tendon was cut and required surgery.

Broad & James, Inc.

An employee was installing a hydraulic extension cylinder in a tow truck when their leg was caught between the cylinder and the truck frame. The employee was hospitalized with a broken tibia, which required surgery.

TRC Services of Texas INC

An employee was sorting sucker rods. His right hand was caught in the area where the rod hits up against the frame and his index fingertip was amputated just below the nail.

Claude Howard Lumber Company

An employee was repairing a photo eye on the infeed roll case when they dropped a tool. The employee went to grab the tool and his fingers contacted the chain and sprocket of the infeed roll case. His fingers were pulled into the pinch point and the fingertips were crushed, resulting in amputation of one fingertip.

Shintech Inc

An employee was troubleshooting dispersing equipment. A belt and pulley system was energized, and the moving belt caught the employee's right ring finger. He suffered a partial amputation at the first knuckle, below the nail.

West Fraser, Inc.

An employee was cleaning the photo eye sensors of a piece of equipment between the saw that cuts lumber into lengths and boards. The employee stepped on a metal grate that gave way and fell 8-10 feet. The employee was able to remove himself from the conveyor. His tibia was fractured just below the knee.

SWS Sawmill, LLC

An employee was working to get a log back onto a carriage. The employee came into contact with the running saw, which amputated their arm.

IDAHO FOREST GROUP, LLC

While refilling a lubricant tank, an employee observed that a pump was not operating correctly. While troubleshooting the issue, the employee reached toward the back of the pump to check for proper airflow. Their left index finger contacted moving components in the pump's piston mechanism, resulting in partial amputation of the fingertip.

Caperton Furniture Works, LLC

An employee tripped over a concrete curb stop in a parking lot. The employee fell to the ground, landing on their left hip and breaking it.

Certainteed Gypsum West Virginia, Inc

An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.

Owens Corning

An employee was climbing down a ladder when it slipped. The employee fell, suffering a broken scapula and broken ribs. The employee was hospitalized.

Applied Integrated Services, LLC

An employee was climbing down a 15-foot multipurpose ladder. The employee fell about 8 feet, landing on the concrete floor and the ladder itself. The employee suffered several injuries, all on the right side: broken ribs, a broken sternum, a broken temporal bone, broken shoulder, multiple fractures to the cheekbone, and a brain bleed.

Fedex Freight Inc.

An employee was rolling up the landing gear on his trailer when the handle began to unwind and struck his face, fracturing his jaw. The employee was hospitalized and required surgery.