Collision with stationary object, nonroadway · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Red Arrow Products, 4000 Red Arrow Drive, RHINELANDER, WISCONSIN 54501
on — Fractures , affecting the Exterior and musculoskeletal structures of the back unspecified.
Final narrative
An employee was unloading sawdust from a box trailer using a skid steer. The skid steer backed into a steel beam and railing, and the employee suffered a back fracture.
Hospitalized Exterior and musculoskeletal structures of the back unspecified Skid-steer loaders, mini loaders
An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was operating a stand-up forklift. The forklift drove into a rack in a warehouse, and the employee's right hand was caught between the rack and an upright supporting the forklift's overhead guard. The employee suffered a fracture and laceration to the hand, just below the little finger.
More severe injuries in this industry (NAICS 311942)
An employee was transferring scrap metal from a tote into a metal recycling dumpster for disposal. While throwing a 20-pound stainless steel motor into the dumpster, the employee moved in closer to ensure it went inside. As they tossed the motor, it appeared to be off-target, so they went to push and redirect it while it was in the air. During this action, their right ring and little fingers were caught between the falling motor and the edge of the dumpster. The employee suffered a crush injury to the ring finger and an amputation of the little finger above the top knuckle.
An employee was cleaning a piece of machinery when the tool they were using became lodged in the running machine. The force of the tool becoming lodged fractured their left forearm.
An employee was driving a stand-up forklift into a truck trailer at a loading dock. The dock plate and the truck separated, and the forklift fell to the ground. The employee's left foot was caught and broken between the dock plate and the forklift; the employee was hospitalized, requiring surgery.
An employee was sweeping the platform area around a dumpster and began walking down stairs when he fell to the last step, resulting in a right shoulder injury. The employee was hospitalized.
On January 29, 2025, an employee was working to remove a piece of debris on a bag sealing machine. The employee's finger was pulled through a pulley by a moving belt behind the guard, resulting in a fingertip amputation.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.