Caught or wedged between objects nonrunning · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Kerr Pumps, 2214 W 14th Street, SULPHUR, OKLAHOMA 73086
on — Amputations, avulsions, enucleations unspecified, affecting the Finger or thumb tip(s), nail(s).
Final narrative
An employee was dumping a "self-dumping chip bin" (on the forks of a forklift) into a 3- or 4-foot-tall dumpster. The bin tilted forward. Thinking it was going to slide off the forks, the employee reached to grab the bottom of the bin to stop it. The bin then rotated back. The tip of the employee's left middle finger, from the first knuckle past his fingernail, was caught between the bin and the top of the forklift pocket frame. The fingertip was amputated just above the first knuckle.
Amputation Finger or thumb tip(s), nail(s) Forklift, order picker, platform truck powered
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.
More severe injuries in this industry (NAICS 333911)
On March 26, 2025, an employee was standing on a work table that was 23" high to abrasive blast the upper section of a pump. When he stepped off the table with his left leg, his left knee gave out and he fell to the ground, landing on his right hip. The employee sustained a displaced right hip fracture near the joint and was hospitalized.
An employee was pressure washing a suspended part when the part started spinning. The employee manually stopped the part from spinning when his hand was caught in the pressurized water blast. The employee was hospitalized with a laceration.
An employee was operating a stand-up forklift in the warehouse when the forklift spun and the employee was caught between the forklift and metal shelving. The employee sustained multiple broken ribs.
An employee was threading an ID thread gauge into a part chuck and machine spindle. The thread gauge caught the glove on his right hand and pulled his hand into the spindle, crushing it. The employee was hospitalized with contusions and lacerations.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.