105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

LaJoie's Auto Wrecking Co., Inc.

Other fall to lower level less than 6 feet · Fractures

Federal OSHA recorded a severe workplace injury at LaJoie's Auto Wrecking Co., Inc., 40 Meadow Street, NORWALK, CONNECTICUT 06854 on — Fractures , affecting the Pelvis.

An employee was on a 6-foot step ladder, welding on the back of a large forklift rack. The ladder shifted and he fell backward, landing on the concrete floor about 4 feet below. He suffered a pelvic fracture and was hospitalized.

Hospitalized Pelvis Step ladders

A&S Services Group

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

Kisatchie Midnight Express

A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.

Lockheed Martin Mission Systems and Training

Two employees were removing a service lift platform from the back of a radar system. While handling the service lift platform, employee 2 was standing on the back of the radar and lost their footing, causing the service lift platform to shift and fall. The injured employee then fell from the top of the platform electronic subsystem (PES) to the floor, approximately 56 inches. The injured employee fractured his left elbow and left hip.

Allen Tharp LLC.

An employee fell from a loading dock to the ground 2-3 feet below. She suffered a compound fracture of the left hip and was hospitalized, requiring surgery.

Allied Waste Systems Inc

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

Protech

An employee was kneeling on his left knee with his right knee up while taking measurements of a car he was working on. As he switched knees, and put his right knee on the ground with his left knee up, his right hip dislocated and he bent forward onto his hands. The employee was hospitalized and required hip surgery.

Caliber Collision Center

An employee was finishing up using a resistance welder on a vehicle. After finishing, he removed his gloves and picked up the resistance welding arm with his left hand on the hydraulic cylinder and his right hand on the handle. The button on the handle was activated and the hydraulic cylinder engaged, catching the tip of his left little finger and resulting in a fingertip amputation.

Caliber Collision

An employee was working to attach a safety handle to the cable portion of a pulley system designed to aid in the operation of a resistance welder. The tension on the cable was disengaged, then reengaged while the employee's left hand was on the top of the pulley system. The cable caught the tip of the employee's left little finger, causing an amputation at the first joint.

Service King Collision McDonough

At about 8:00 a.m. on August 8, 2025, an employee was holding a metal coupon for another employee to use in demonstrating spot-welding technique to a third, student employee. A metal hole puncher was activated and crushed the employee's left middle finger, resulting in an amputation to the finger. The incident occurred during a training activity.

Caliber Holdings LLC.

An employee was closing the gate at the end of the day when it missed a latch and came off its track. The gate fell onto him, resulting in hospitalization with a fractured femur that required surgery.

Heavy Weight Inc

An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.

Duro Bag

An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.

United Refrigeration Inc

An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.

Michels Power, Inc.

An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.

Parker-Hannifin Corporation

An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.