Clemens Food Group, LLC

The injured employee was operating an unloaded powered industrial truck (PIT) and was following a stacker truck that was carrying a palletized load. The stacker truck stopped and the injured employee's right lower leg impacted the palletized load on the stacker truck, resulting in a fracture.

An employee was disassembling a processed meat patty making machine for cleaning when a metal part fell and their right little finger was caught between the falling part and the solid metal frame of the machine, resulting in the amputation of the finger.

An employee was moving vats of meat into a cooler using a walk behind forklift when their finger became pinched between a metal vat and the forklift handle, resulting in an amputation to a finger.

An employee was using the tip of a knife to pull back the head of a pig when the knife came back through the pig's head and cut the employee's upper arm, resulting in laceration that required surgery.

An employee was trying to clear jammed film from a machine. The machine cycled while the employee's fingers were in the forming box, causing amputations to the employee's index and middle fingertips.

An employee was checking credentials for vehicles entering an area. While approaching a vehicle that had failed to stop as instructed, the employee lost his balance and fell backward, landing on his back. The car struck him, and he suffered a tailbone fracture and a kidney injury.

An employee was riding on the side of a forklift. He stepped off the forklift and was struck by the back end of the forklift as it turned to the right. The forklift's back tire ran over his leg, resulting in an amputation. The employee was hospitalized.

An employee was closing a rear trailer door in the parking lot when they were struck by a forklift. The employee's lower left leg was crushed between the pallet on the forklift and the trailer. The employee sustained muscle damage to their lower leg.

An employee was guiding a customer's automobile onto the alignment rack when the vehicle drove over the rack and pinned the employee against the alignment computer. The employee sustained a bruised left hand and a fractured left fibula and was hospitalized.

A backhoe tractor was moving gravel into a 1-foot-deep trench, and an employee was helping spread the gravel. The trench had been partly filled and the tractor was returning to it with a load of stone when its raised bucket struck the employee, who was standing in the trench. He was hospitalized, having suffered an abdominal injury that caused internal bleeding.

An employee was scraping dried glue from the top lid of a hot glue pot. His left hand slipped and came into contact with the hot glue. He then suffered burns to his hands and fingers as he tried to remove the glue. He was hospitalized.

An employee was in a scissor lift approximately 20 feet above the ground to place a plastic tarp on a catwalk in order to catch condensation. They positioned the lift opposite the work area and stepped out of the scissor lift onto an I-beam. The employee fell from the I-beam to the ground. The employee was hospitalized with a skull fracture on the right side of their head and injuries to the chest and both eyes.

A maintenance employee was called to look at a pallet conveyor machine where a chain had fallen off a sprocket wheel. When the employee grabbed the loose chain, a light sensor caused the machine to restart. This created a pinch point between the chain and sprocket that caught the employee's left little finger. The finger was surgically amputated at the second knuckle.

The injured employee was standing by one of the stationary computers along the wall. There was a half-pallet located approximately 3 feet behind the employee that consisted of 12-pound boxes stacked six boxes high. A forklift was transporting a pallet that came in contact with the stationary pallet behind the injured employee, causing four boxes to fall and contact their legs. The injured employee was hospitalized with leg injuries.

An employee was using a box strapping machine to place straps on boxes when his right middle finger was caught in the machine, resulting in an open fracture to the distal phalanx.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.