Brittany Global Technologies

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee's left arm was caught in the fingers or jaws of the head stretcher machine, resulting in a laceration. The employee was hospitalized.

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

An employee was operating an electric standing pallet jack and pulling an empty A-frame when the jack struck a guard rail. The employee fell from the lift to his right hip and elbow on the concrete floor, and was hospitalized with a fractured hip.

An employee was clearing yarn that had wrapped around a gear-driven conveyor belt when his left arm got pulled between the belt and a roller. The employee sustained a fractured arm, as well as lacerations and abrasions.

On November 5, 2024, an employee was working on a lamination line. He had removed a slot assembly from a coating station, placed it into a portable slot cleaning tank, and rolled the cart with the assembly out of the cleaning tank. He hit the door of the coating station, and the slot assembly fell from the cart and crushed his little finger. He suffered an amputation above the first knuckle.

An employee was working on the thermal bond production line when the laydown formation table became filled with fabric. The employee was cleaning the area when the machine restarted. The employee's hands were caught between a belt and a roller resulting in amputations to multiple fingers on both hands.

An employee was correcting a malfunction on a covering machine when their left hand was caught in a moving component and they sustained a left index fingertip amputation.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.