Nonroadway noncollision fall or jump from and struck by moving vehicle · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at J. Poli Inc., Perryman Company North End of Building, HOUSTON, PENNSYLVANIA 15342
on — Fractures , affecting the Elbow(s).
Final narrative
An employee was using a battery-powered scissor lift to load a trailer. The scissor lift shut off halfway up the ramp leading into the back of the trailer, drifted backward, and fell off the side of the ramp. The employee rolled with the scissor lift, jumped off, and was crushed. The employee suffered an open fracture to the left elbow and was hospitalized.
An employee was operating a forklift to remove a pipe from the lower section of a pipe rack. Once the employee had the pipe on the forks, the employee parked the forklift and walked to the load to center it. Another pipe then shifted off the forks and fell, pinning the employee between the pipe and an ingot up ender behind him. The employee sustained a tibia and fibula fracture.
An employee was working on a piece of duct work when the duct work roof fell in, causing the employee to fall 15 feet to the bottom of the duct. The employee sustained a cut to the back of their head, a fractured pelvis, a collapsed lung, and broken ribs on the left side of their chest.
An employee was riding on the side of an all-terrain forklift when they fell into the space between the gas tank and the right rear tire. The employee was run over by the the right rear tire, resulting in fractures to their neck, pelvis, and right leg.
Employees were moving a paving machine. The machine had been pulled forward, then put in reverse to back up a hill, when it revved up and went out of control. It had moved about 40 feet when one employee jumped out of it and was dragged under it. A second employee rode about another 40 feet, then jumped out to avoid a steep embankment. The first employee suffered a broken pelvis, and the second employee suffered a broken lower leg. Both were hospitalized.
An employee was operating a lawn mower. He fell off while making a turn and the mower ran over his right foot. The employee sustained a laceration on his right ankle.
An employee was traveling on a walker rider as it headed for the outer wall of the warehouse office. He jumped off the front of the rider which caused his legs to be caught between the base of the rider and the yellow safety rail. The employee sustained a fractured right fibula.
More severe injuries in this industry (NAICS 236210)
An employee was fixing a broken purlin at a worksite when they fell from the framing to the concrete floor approximately 19 feet below. The employee sustained brain bleeding and fractures to their face, vertebrae, and wrists.
Employees were removing scaffolding that was used to repair an ion exchange tank. The line was undergoing the regen process when a piece of scaffold struck a PVC pipe that transported hydrochloric acid (HCl). The injured employee was placing material inside a scaffold rack when he was sprayed in the face with HCl and sustained chemical burns to his eyes, face, chest, right arm, and left leg.
An employee was moving a ramming machine to a staging area. While using the controls on the side of the machine, there was a sudden heavy rainfall causing the equipment to slide. The ramming machine tipped over and caught the employee against the ground. The employee sustained a fracture to the right side of their pelvis and was hospitalized.
The injured employee was training a new employee on a dough machine. She went to show where the batter comes from and her right index fingertip was cut. The employee sustained an amputation to the fingertip. The machine was not guarded at the time of the incident.
An employee was operating a roller machine on a dirt slope when the machine hit a bump and fell onto it's side. While trying to get free of the falling machine, the employee's legs were pinned by the top bar of the cage. The employee was hospitalized and his left leg was amputated. He also sustained fractures to a hand and finger.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.