Pedestrian struck by forward-moving vehicle in road work zone · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at J&R Sand Company, Inc., HWY 287, BOISE CITY, OKLAHOMA 73933
on — Fractures , affecting the Hip joint(s).
Final narrative
An employee was working as a flagger on a highway construction site when they were struck by a vehicle. The employee sustained a fractured left hip and a laceration above the right eye.
Hospitalized Hip joint(s) Roadway vehicle motorized, unspecified
An employee was assisting the crew with patching and restoring a roadway after the installation of a sewer line. He was helping place and level the blacktop/backfill material over the trench area to bring the road surface back to proper grade. The employee was walking between a forward-moving dump truck and a dirt pile when his right foot was run over by the truck s wheel, causing him to fall. The employee sustained injury to his foot.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.
A combine bean head was being hauled through a work zone on a trailer. It struck an employee in the head as he poured concrete, knocking him to the ground. The employee suffered a subdural hematoma and was hospitalized.
A crew was burning temporary tape during highway construction when a tractor trailer drove into the work crew, injuring three employees. One employee jumped from the roadway into a ditch, resulting in hospitalization with multiple fractures that include the right shoulder, pelvis, leg, ankle, and three vertebrae, as well as road rash, severe facial damage, a brain bleed, multiple cuts and bruises, and shock.
An employee was performing flagging duties for a work zone while standing on the shoulder of a two-lane road. The mirror of a passing pickup truck struck the employee, resulting in injuries to their head, neck, left shoulder, and left arm.
More severe injuries in this industry (NAICS 237310)
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee was cleaning out an inlet pipe in a stormwater structure. The employee stepped back, fell into the pipe, and landed on concrete 13 feet below, at the bottom of the structure. He suffered a broken back.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was working with paving equipment and heard a noise on the opposite side of the machine he was working on. When the machine stopped, the employee went to the opposite side and crouched down to investigate the noise. A mini track loader backed up and drove over the employee's leg. The employee sustained fractures to their lower leg, ankle, and foot.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.