Struck by running powered equipment during maintenance, cleaning, testing · Cuts, lacerations, punctures without injury to internal structures
At a glance
Federal OSHA recorded a severe workplace injury
at Walmart, Inc., 3300 K-68 Highway, OTTAWA, KANSAS 66067
on — Cuts, lacerations, punctures without injury to internal structures, affecting the Hand(s), except finger(s).
Final narrative
Two employees were assessing the source of a thumping noise on an unloader machine. The injured employee was lying down on the floor, parallel to the unloader machine, using his flashlight to look into the bottom of the machine. He reached up with his right hand to identify a vibration or temperature when his hand got caught in a pinch point between a roller and the drum/drive, resulting in a laceration to the palm. The machine was not locked out or tagged out at the time of the incident.
Hospitalized Hand(s), except finger(s) Material handling and warehousing machinery unspecified
An employee was collecting shopping carts in the parking lot when he was struck by a customer's truck as it was backing out of a parking spot. The truck pinned the employee's left leg against the cart mule they were using. The employee was hospitalized with a fractured leg and required surgery.
An employee was lifting a box of produce in the backroom area when she suffered pain in her lower back and was unable to stand, resulting in hospitalization.
An employee was walking to take their break. As they walked from their locker to the entrance of the break lounge, they tripped over a pallet and fell to the ground, resulting in hospitalization due to a concussion.
On October 5, 2025, an employee was stocking materials when their foot struck an apparel rack, causing them to fall and suffer a hip injury that required hospitalization.
A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
More severe injuries in this industry (NAICS 493110)
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
An employee was operating an extruder and performing a spool swap over from the right spindle to the left spindle. After rewiring the new spool, the employee's clothing got caught in the turning shaft when the left spindle started back up. The employee's left arm was pulled into the machine, resulting in a fractured humerus and lacerations to her triceps. She was hospitalized and required surgery.
An employee was resetting a warehouse racking system utilizing an order picker. They fell approximately 5 feet from the order picker to the concrete floor and sustained fractured ribs.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.