Modine Manufacturing Company

An employee was hanging parts on the powder paint line using hooks and eye bolts. An eye bolt came out of the threads and a part fell on the employee's right middle fingertip, resulting in amputation.

An employee was placing a rolling cart (12 feet by 4 feet) into a large oven. The employee's right hand was caught between the cart and the oven frame, resulting in the amputation of two of the employee's fingertips.

An employee was performing cleanup activities. As they reached to remove wood from the table saw, the wood broke, causing the employee's hand to strike the table saw. The employee sustained a fracture to the right index finger.

An employee loaded a steel part onto a brake press to be formed. During the second bend of the material, a pinch point was created between the material and the tooling of the machine. The pinch point contacted the employee's index and middle fingertips, resulting in amputations below the nail and above the knuckle.

An employee was working on a line using a pneumatic torque wrench when his left glove got caught in the tool while the wrench engaged. The employee suffered the amputation of his left ring fingertip.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

A service crew was pulling a pump and motor from a well. After breaking a joint of pipe loose from another joint, an employee grabbed the chain tongs to prevent the pipe from spinning in the well, so the crew could continue taking it apart. The bolt that attaches the chain to the handle of the chain tongs broke, causing the chain to swing around and strike the employee's lower right leg. The chain severely punctured his leg and fractured his tibia.

An employee was using a handheld grinder to cut a bolt. The grinding wheel broke apart and a fragment struck the employee s right hand, causing a laceration to the palm near the little finger.

An employee was operating a brake press when the top die broke, causing the bottom die to roll out and onto the employee's legs. Both of the employee's legs were crushed below the knee, and both legs were partially amputated. The employee's left leg was also fractured above the knee.

A pressurized aircraft nose landing gear strut assembly was being disassembled. The gland nut dislodged under pressure and made contact with an employee's left hand, breaking it.

On September 30, 2025, at 1:45 a.m., an employee was operating a forklift to load materials on an outbound dock. His left foot became caught between the forklift and a pole, resulting in a broken big toe.

An employee was riding a horse in the horse corral/riding arena when the horse bucked multiple times. The employee performed an emergency dismount off the right side of the horse. When she landed, she fell backward in the sand, onto her back. The employee sustained a crushed vertebra.

An employee was pulling an electrical wire from a circuit. The wire contacted a live wire and created an arc flash. The employee sustained burns on their left side and arm.

An employee was operating a heat press machine. His right foot was caught between a paper roller and the heat press, resulting in amputation of a toe.

On 11/08/2024, an employee was working on piping a refrigeration condenser. Refrigeration condensers arrive from the factory with the internal piping pressurized and the end capped. The employee was cutting a capped refrigeration line when the cap blew off, striking the battery-operated saw he was using and knocking the saw it into his face. He was cut under the nose and struck on the head. The angle of the impact pushed metal fragments under his safety glasses and into his eyes. The employee sustained metal fragments in his eyes, lacerations to the face, and contusions to the head.

An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.

The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.

An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.

An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.

An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.