Federal OSHA recorded a severe workplace injury
at C.K.S. PACKAGING, INC., 10 Great hill Road, NAUGATUCK, CONNECTICUT 06770
on — Fractures , affecting the Thigh(s).
Final narrative
An employee was changing the filter on the blow back. He was using a ladder to help him get onto a platform. He fell from the ladder while holding the filter housings and fans. He struck his head on the concrete floor. The employee sustained a fractured right femur and a contusion to the head.
Hospitalized Thigh(s) Portable ladders and stairs unspecified
On September 29, 2023, an employee was repairing the drive chain on a conveyor when the machine activated. The employee's hand was caught between the chain and sprocket, resulting in three fingertip amputations to the left hand.
An employee was clearing a jam in the discharge opening of a machine when the mold came down, crushing and fracturing four fingers on the employee's right hand.
An employee was attempting to adjust a machine that peels plastic off of bottles when the machine's striker plate pulled his glove in and then crushed his right pinky fingertip, amputating it.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
More severe injuries in this industry (NAICS 326160)
An employee was watching as a technician worked with a machine. The machine's parts were manually moved while the employee's hand was inside the machine, and his fingertip was amputated. The incident took place during a training activity.
On October 14, 2025, an employee was on a step platform showing another employee the support bracket for a blow pin assembly on a blow molding machine that needed repaired. The blow pin assembly came up and pinched the injured employee's right middle finger, resulting in a broken finger and a laceration to the top of the hand.
On August 22, 2025, an employee was helping to move a 700-pound compressor cylinder cap head into position to slide down the bolt holes onto the bottom half of the cylinder. When a bolt hole aligned, his left index fingertip was caught in it. The cap came down and amputated the fingertip.
A maintenance employee was working on a conveyor when his thumb was caught in the chain/sprocket area causing an amputation to the thumb tip. The machine was running at the time of the incident.
On March 20, 2025, at approximately 11:02 AM, an employee was shrink wrapping a pallet when he lost his balance and fell to ground. The employee sustained a hip and leg injury that required hospitalization and surgery.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.