HARTFORD, WISCONSIN—
UFP Packaging
Struck by discharged object or substance · Cuts, lacerations, punctures without injury to internal structures
At a glance
Federal OSHA recorded a severe workplace injury at UFP Packaging, 5840 Wisconsin 60 Trunk, HARTFORD, WISCONSIN 53027 on — Cuts, lacerations, punctures without injury to internal structures, affecting the Ankle(s).
Final narrative
An employee was assembling scrap wood crates using a nail gun. As he repositioned his body, his right ankle contacted the nail gun, causing it to discharge. The employee suffered a puncture wound to his right ankle.
More severe injuries at UFP Packaging
GRANDVIEW, TEXAS—
UFP Packaging
The injured employee was lifting 4 sheets of 3/8-inch plywood with his teammate. As they went to drop the plywood, the injured employee's left ring finger became caught between the sharp edge of the plywood and the four carried sheets. The employee sustained a fingertip amputation.
View UFP Packaging's full OSHA safety record →
Similar incidents · Same event type
MONTGOMERY, ILLINOIS—
TSA Processing - Montgomery
A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.
TAMPA, FLORIDA—
First Environmental, Inc.
An employee was working to assess the operation of a high-pressure water nozzle. The water system was activated and the employee was cut by high pressure water on his left hand where the palm meets the wrist. The employee was hospitalized.
WAHPETON, NORTH DAKOTA—
American Industrial Services
An employee's left bicep was lacerated by high-pressure water during water blasting operations. The employee was hospitalized.
SCRANTON, ARKANSAS—
Johnson Industrial Coatings, LLC.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.
MARIBEL, WISCONSIN—
Tanksco, Inc.
An employee was sandblasting paint from a water tower when the blasting media sprayed across their forearm, resulting in an elbow injury that required hospitalization.
More severe injuries in this industry (NAICS 321920)
AUSTIN, TEXAS—
Pallet Bros. ATX, LLC
An employee was cutting wood with a miter saw when their clothing was pulled into the blade, resulting in a bicep laceration. The employee was hospitalized. The blade cover was not in place at the time of the incident.
SAINT ALBANS, MAINE—
GERRITY INDUSTRIES
Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.
GUTHRIE, OKLAHOMA—
Burgess Manufacturing of Oklahoma Inc.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.
COLUMBUS, OHIO—
Kamps, Inc
An employee was operating a bubble wrap production line. He was splicing the ends of the film rolls together with tape when a driven roll contacted his hand. His hand and arm were pulled into the machine up to his shoulder. The employee's forearm contacted the the hot surface (230-500 F) of the bubble stamping cylinder. He was hospitalized with burns to the forearm that required surgery and crushing injuries to the hand and forearm without fractures.
YOUNGSTOWN, OHIO—
Iron City Wood Products, Inc.
An employee was operating a pallet dismantling saw. A board became stuck, and the employee tried to pull the pallet. When the board broke, the employee's right hand made contact with the blade, resulting in the amputation of the right middle finger above the second knuckle.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.