An employee was inside a docked barge cutting the rudder. Another employee was on the deck of the barge cutting the decking above and during the cut, the barge piece broke off and the employee below was crushed and sustained multiple injuries requiring hospitalization. The piece of the barge that fell was 20 feet, 4 inches x 10 feet, 4 inches.
Hospitalized Multiple body parts unspecified Scrap metal
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
A service crew was pulling a pump and motor from a well. After breaking a joint of pipe loose from another joint, an employee grabbed the chain tongs to prevent the pipe from spinning in the well, so the crew could continue taking it apart. The bolt that attaches the chain to the handle of the chain tongs broke, causing the chain to swing around and strike the employee's lower right leg. The chain severely punctured his leg and fractured his tibia.
An employee was using a handheld grinder to cut a bolt. The grinding wheel broke apart and a fragment struck the employee s right hand, causing a laceration to the palm near the little finger.
An employee was operating a brake press when the top die broke, causing the bottom die to roll out and onto the employee's legs. Both of the employee's legs were crushed below the knee, and both legs were partially amputated. The employee's left leg was also fractured above the knee.
A pressurized aircraft nose landing gear strut assembly was being disassembled. The gland nut dislodged under pressure and made contact with an employee's left hand, breaking it.
More severe injuries in this industry (NAICS 488390)
An employee was securing a power cord to a refrigerated truck container. A truck started backing up to connect with the container and the employee was pinned between the tires of the container and the bolster of the truck, resulting in a fractured leg.
An employee was exiting a tank barge's cargo tank after pressure-washing its inside. He was resting at the top of the fixed ladder, with his upper body out of the tank hatch, when he collapsed and fell about 13 feet into the cargo tank. The employee sustained a fractured spine requiring surgery. The employee hospitalized.
An employee was using a pocket knife to cut a zip tie that was holding the slacked portion of line on a ratchet strap. The ratchet strap opened unexpectedly, causing the employee to lacerate an artery in his left forearm. The employee was hospitalized and required surgery.
An employee was walking across a catwalk on a vessel. The employee slipped and fell, striking their right side on the catwalk and suffered broken ribs on that side. The employee was hospitalized.
An employee was spray painting an area of a marine barge using a pressurized paint gun. Her glove became stuck to the gun. Her left hand came out of the glove and while trying to adjust the gun, paint was injected into her left middle finger.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.