Channel Marine Services

An employee was preparing a barge for the end of a day's drilling operations. He was setting a spud on the barge when the spud struck him and broke his right leg.

A team of employees was moving boats from one slip in a marina to another using rope. An employee slipped while moving around in a boat and suffered a broken left femur.

The injured employee was standing by the controls for the electric spud system on the barge, preparing to raise the spuds. Meanwhile, an excavator was moving a mat on the deck. As the excavator swung from port to starboard, it's counterweight struck the injured employee s shoulder, causing them to lose balance and fall against the spud controls. The employee sustained bruises and contusions to their right shoulder and chest.

An employee was inserting dogbone links (4 feet 9 inches in length) into the slots between sectional barges to connect the barges. A dogbone link became stuck in the slot and needed to slide down approximately 1 foot to be seated. The employee went to lift the dogbone link up and adjust it when the link became free. A burr on the flange of the link snagged the employee's right glove. The link slid into a seated position and the employee's right middle finger was caught between the top surface of the barge and the top flange of the dogbone link. The finger was partially amputated at the midsection of the distal phalanx.

An employee was working to unload cargo from a ship. A steel coil contacted the employee's left leg. The lower leg was fractured.

An employee was securing a power cord to a refrigerated truck container. A truck started backing up to connect with the container and the employee was pinned between the tires of the container and the bolster of the truck, resulting in a fractured leg.

An employee was using a pocket knife to cut a zip tie that was holding the slacked portion of line on a ratchet strap. The ratchet strap opened unexpectedly, causing the employee to lacerate an artery in his left forearm. The employee was hospitalized and required surgery.

An employee was walking across a catwalk on a vessel. The employee slipped and fell, striking their right side on the catwalk and suffered broken ribs on that side. The employee was hospitalized.

An employee was spray painting an area of a marine barge using a pressurized paint gun. Her glove became stuck to the gun. Her left hand came out of the glove and while trying to adjust the gun, paint was injected into her left middle finger.

An employee was inside a docked barge cutting the rudder. Another employee was on the deck of the barge cutting the decking above and during the cut, the barge piece broke off and the employee below was crushed and sustained multiple injuries requiring hospitalization. The piece of the barge that fell was 20 feet, 4 inches x 10 feet, 4 inches.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.