Struck by running powered equipment during maintenance, cleaning, testing · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Select Custom Solutions, LLC, 2340 Enterprise Avenue, LA CROSSE, WISCONSIN 54603
on — Amputations, avulsions, enucleations unspecified, affecting the Finger or thumb tip(s), nail(s).
Final narrative
An employee was working on a blending line and connecting a rotary valve to the bagging. He attempted to clear some powder stuck on the rotary valve while the blades were moving, resulting in the amputation of his right middle fingertip.
Amputation Finger or thumb tip(s), nail(s) Mixers, blenders, whippers food and beverage
More severe injuries at Select Custom Solutions, LLC
An employee was checking an inline magnet. The magnet was placed on a cart next to another magnet and the magnets moved toward each other. The employee's right ring fingertip was caught and amputated.
A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
More severe injuries in this industry (NAICS 311514)
An employee was preparing for a clean-in-place (CIP) process and removed a cap from a pipe to connect another pipe. Hot water (approximately 170 degrees) splashed onto the employee, causing burns to her hands, left forearm, and both thighs.
An employee was checking an inline magnet. The magnet was placed on a cart next to another magnet and the magnets moved toward each other. The employee's right ring fingertip was caught and amputated.
An employee was walking near a spring-mounted valve when the valve opened. Steam was released and burned the employee's arm, resulting in hospitalization.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.