The Martin-Brower Company, LLC

An employee was working inside his trailer. As he began maneuvering a pallet jack under a plastic bun tray, he went to take a step to the right and his right foot slipped off the floor of the trailer. The employee fell to the ground and sustained a broken tibia and fibula.

Employees were ending their shift and dropping off trucks. Two employees returned to the yard and had an altercation. One employee used a knife to stab the other employee in the neck. The employee was hospitalized.

An employee was reaching for a button to lower the liftgate of a semi-trailer. The employee tripped, fell to the pavement, and suffered a broken right arm.

A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.

An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.

An employee had been cleaning the work area. While lifting a saw, the employee's index finger was lacerated by the saw blade. A tendon was cut and required surgery.

An employee was installing a hydraulic extension cylinder in a tow truck when their leg was caught between the cylinder and the truck frame. The employee was hospitalized with a broken tibia, which required surgery.

An employee was sorting sucker rods. His right hand was caught in the area where the rod hits up against the frame and his index fingertip was amputated just below the nail.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was making a delivery in a truck. As he exited the truck, he fell on a step and then to the ground, resulting in a fractured tibia.

An employee was picking items from the freezer section of the warehouse. When he stepped down onto the floor, he turned on the planted foot, and felt a "pop" and pain in his knee. The employee was hospitalized with a dislocated knee and two torn tendons. He required surgery to repair the tendons.

An employee was operating an electric pallet jack when it pinned his right ankle against some racking. The ankle was broken and he was hospitalized.

At 7:40 a.m. on October 3, 2025, an employee was unloading a bulkhead at a dock door. As he pulled the bulkhead out of a trailer, its plastic lip caught on the dock plate, causing the employee to fall and twist his left leg, knee, and hip. The hip was broken and he was hospitalized, requiring surgery.

A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.

Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.

An employee was using a metal shear when it amputated the tip of his right index finger.

An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.

An employee was standing on a step stool, removing the nuts and bolts from the frame of a solar panel that was being replaced. The employee's cheek made contact with a connector with damaged insulation. The employee was shocked, briefly lost consciousness, and fell to the ground, suffering an injury to the left shoulder.