Empire Truck Sales, LLC

An employee was on a forklift platform stocking material on a rack and fell approximately six feet and struck his head. The employee was hospitalized.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

A service crew was pulling a pump and motor from a well. After breaking a joint of pipe loose from another joint, an employee grabbed the chain tongs to prevent the pipe from spinning in the well, so the crew could continue taking it apart. The bolt that attaches the chain to the handle of the chain tongs broke, causing the chain to swing around and strike the employee's lower right leg. The chain severely punctured his leg and fractured his tibia.

An employee was using a handheld grinder to cut a bolt. The grinding wheel broke apart and a fragment struck the employee s right hand, causing a laceration to the palm near the little finger.

An employee was operating a brake press when the top die broke, causing the bottom die to roll out and onto the employee's legs. Both of the employee's legs were crushed below the knee, and both legs were partially amputated. The employee's left leg was also fractured above the knee.

A pressurized aircraft nose landing gear strut assembly was being disassembled. The gland nut dislodged under pressure and made contact with an employee's left hand, breaking it.

An employee was on a 20-foot ladder cleaning tile on the side of a building. The ladder slipped and he fell to the ground. He landed on his feet, resulting in hospitalization with fractures to both feet.

An employee was putting away stock in the aisles and began driving his order picker down the aisle with a pallet of items loaded on the forks. The pallet struck an upright of the warehouse racking and was pushed toward the employee, causing him to fall. The front edge of the pallet drove his right leg into the front panel of the order picker, fracturing his right leg above the ankle.

An employee was completing an inspection on a truck when the flywheel amputated their fingertip.

The injured employee was vacuuming out the trunk of a parked vehicle. Another employee was operating a vehicle when the brakes failed and the vehicle struck the back of the injured employee's legs pushing him into the vehicle he was vacuuming. The employee sustained a fractured leg.

An employee got out of his truck and closed the door when his right hand got caught in the door, resulting in a broken ring finger and an amputation of the middle fingertip that required hospitalization.

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.