Pulice Construction Inc

An employee was using an excavator to unload concrete traffic barriers. The excavator swung, tipped over an existing barrier, and fell into a ravine/wetland. The employee sustained a fractured left shin requiring hospitalization and surgery.

A work crew was moving concrete barriers along a traffic lane using an excavator with a barrier lifter. The excavator's boom contacted a 19.9-kilovolt overhead power line, and an employee was shocked. The employee suffered burns to the right hand and right foot.

An employee was assisting the crew with patching and restoring a roadway after the installation of a sewer line. He was helping place and level the blacktop/backfill material over the trench area to bring the road surface back to proper grade. The employee was walking between a forward-moving dump truck and a dirt pile when his right foot was run over by the truck s wheel, causing him to fall. The employee sustained injury to his foot.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.

A combine bean head was being hauled through a work zone on a trailer. It struck an employee in the head as he poured concrete, knocking him to the ground. The employee suffered a subdural hematoma and was hospitalized.

A crew was burning temporary tape during highway construction when a tractor trailer drove into the work crew, injuring three employees. One employee jumped from the roadway into a ditch, resulting in hospitalization with multiple fractures that include the right shoulder, pelvis, leg, ankle, and three vertebrae, as well as road rash, severe facial damage, a brain bleed, multiple cuts and bruises, and shock.

An employee was performing flagging duties for a work zone while standing on the shoulder of a two-lane road. The mirror of a passing pickup truck struck the employee, resulting in injuries to their head, neck, left shoulder, and left arm.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee was cleaning out an inlet pipe in a stormwater structure. The employee stepped back, fell into the pipe, and landed on concrete 13 feet below, at the bottom of the structure. He suffered a broken back.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

An employee was working with paving equipment and heard a noise on the opposite side of the machine he was working on. When the machine stopped, the employee went to the opposite side and crouched down to investigate the noise. A mini track loader backed up and drove over the employee's leg. The employee sustained fractures to their lower leg, ankle, and foot.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.