WESTMINSTER, COLORADO—
Colliers Engineering & Design
Struck by running powered equipment irregular movement, kick back · Fractures
At a glance
Federal OSHA recorded a severe workplace injury at Colliers Engineering & Design, Wadsworth Parkway & West 108th Ave, WESTMINSTER, COLORADO 80021 on — Fractures , affecting the Thumb(s).
Final narrative
An employee was operating a core drill when the blade got stuck in the asphalt he was attempting to cut. The drill continued to spin, knocking him down, and then striking his left arm and thumb, resulting in a fractured thumb.
Similar incidents · Same event type
EXCELSIOR SPRINGS, MISSOURI—
Champion Replacement Windows of Kansas City
An employee was cutting a board using a circular saw. The saw pinched, kicked back, and cut the employee's left ring and little fingers. The employee suffered an amputation to the little finger.
INGLESIDE, TEXAS—
Jamestown Metal Marine Sales, Inc.
An employee was cutting wood with a circular saw. The saw kicked back, and its blade cut three fingers on the employee's right hand, resulting in an amputation.
HOUMA, LOUISIANA—
Oschner Clinic Foundation
An employee was using a table saw to cut wedges for a deck when the wood jumped and his right palm was lacerated by the blade.
KANSAS CITY, KANSAS—
Menard, Inc.
An employee was doing a cutback on a piece of lumber using a chop saw. The saw hit a knot, the piece of lumber buckled, then kicked back and broke the kickback guard. The board was then pulled back into the blade, which lacerated the employee's left index and middle fingers.
ROANOKE, TEXAS—
FC Drywall
An employee was cutting wood with a circular saw. The machine lagged and cut the employee's finger. The employee required surgical amputation of the finger at the hospital.
More severe injuries in this industry (NAICS 541330)
TATUM, TEXAS—
Fluor
An employee was working to free a load by grabbing and shaking the live side of a tugger line. Once the load became free and progressed upward, the employee's hand was caught and pulled into a snatch block. The employee's right thumb was broken and lacerated. The employee was hospitalized and required a surgical amputation.
LEHIGH ACRES, FLORIDA—
UES Professinoal Solutions, LLC
An employee was operating a drill rig when when their hand got caught between a 1/4-inch steel cable and a drill rod, resulting in the amputation of four fingers.
EAST HAMPTON, NEW YORK—
Elecnor Hawkeye, LLC
An employee was overseeing the operation of a rope being respooled onto the drum of a wire winding machine. He went to remove a piece of wooden reel from the rope. His glove got snagged and his right hand was pulled into the roller, pinching his fingers between the machine's roller and the rope. The middle and index fingers were crushed.
SNYDER, TEXAS—
WEST AFFUM DEVELOPMENT CO LLC
An employee was visiting a patient's home to fit them with a wearable cardiac defibrillator. As he was walking from the front door to his car, a large dog broke free from a chain and attacked him. He was bitten on the forearm and fell. The patient was then able to restrain the dog. The employee was hospitalized with severe dog bites and required surgery.
BAY CITY, TEXAS—
Day & Zimmermann
An employee tripped over a junior I-beam about 4 feet long and 6 inches tall that was installed for circulating water valves and fell to the ground, resulting in a broken right-side rib.
More severe injuries in COLORADO
GREELEY, COLORADO—
ABC Supply Company
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
BOULDER, COLORADO—
Burke Builders Inc
An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.
LONGMONT, COLORADO—
Circle Graphics, Inc.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
DENVER, COLORADO—
FLATIRON CONSTRUCTION CORP.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
BURLINGTON, COLORADO—
Takkion OPS Management
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.