Struck by dislodged or detached object(s) · Cuts, lacerations, punctures without injury to internal structures
At a glance
Federal OSHA recorded a severe workplace injury
at CONSOLIDATED INDUSTRIES, INC., 677 MIXVILLE ROAD, CHESHIRE, CONNECTICUT 06410
on — Cuts, lacerations, punctures without injury to internal structures, affecting the Abdomen unspecified.
Final narrative
An employee was operating a hammer machine to forge a heated nickel alloy billet. A fragment of the material broke off and struck the employee in his abdomen. The employee was hospitalized and underwent surgery to have the piece of metal removed from his abdomen.
Hospitalized Abdomen unspecified Chips, pellets metal
More severe injuries at CONSOLIDATED INDUSTRIES, INC.
An employee was walking in the parking lot when they slipped on ice near the gutter downspout and fell. The employee sustained a fracture to their right hip at the proximal end of the femur.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
A service crew was pulling a pump and motor from a well. After breaking a joint of pipe loose from another joint, an employee grabbed the chain tongs to prevent the pipe from spinning in the well, so the crew could continue taking it apart. The bolt that attaches the chain to the handle of the chain tongs broke, causing the chain to swing around and strike the employee's lower right leg. The chain severely punctured his leg and fractured his tibia.
An employee was using a handheld grinder to cut a bolt. The grinding wheel broke apart and a fragment struck the employee s right hand, causing a laceration to the palm near the little finger.
An employee was operating a brake press when the top die broke, causing the bottom die to roll out and onto the employee's legs. Both of the employee's legs were crushed below the knee, and both legs were partially amputated. The employee's left leg was also fractured above the knee.
A pressurized aircraft nose landing gear strut assembly was being disassembled. The gland nut dislodged under pressure and made contact with an employee's left hand, breaking it.
More severe injuries in this industry (NAICS 331522)
An employee was walking in the parking lot when they slipped on ice near the gutter downspout and fell. The employee sustained a fracture to their right hip at the proximal end of the femur.
An employee was taking the temperature of a furnace and a foundry crucible when the crucible broke and splashed molten metal onto the employee's back and neck causing burns. The employee was hospitalized.
An employee was welding a steel casting (weighing approximately 650 lbs.) when the casting moved and fell on his right foot, resulting in a crushed right foot. The employee was hospitalized.
An employee was lifting a component into a water blast machine when their right middle finger got caught between the lifting hook of the hoist and the component resulting in a fingertip amputation.
An employee was trimming scrap metal when their hand was caught in the 15-ton hydraulic press. The employee's hand was crushed, resulting in a finger amputation and loss of skin between both thumbs and index fingers.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.