Exposure through intact tissue · Chemical burns, corrosions degree unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Nick's Metal Fabricating & Son's inc, 2870 North 2553rd Road, SENECA, ILLINOIS 61360
on — Chemical burns, corrosions degree unspecified, affecting the Hand(s), finger(s) unspecified.
Final narrative
On September 3, 2024, an employee was using paint stripper to strip paint off a rail and later experienced the feeling of burning on his hands. The employee was hospitalized with burns on his hands.
An employee was removing a hose from a chemical tank after filling the tank with hexamethylenediamine (HMD). He checked the line to ensure that the hose was clear, then disconnected the hose at the connection. Residual chemical sprayed onto his face, causing a second-degree burn. He was hospitalized.
A shipping/receiving operator was working on a loading rack, loading a railcar. A 2-inch discharge cap failed and released pressure along with sulfuric acid from the railcar. The acid sprayed onto the employee, who suffered burns to the chest and the lower facial area. The employee was hospitalized.
An employee was pressure washing truck scales when they were splashed with water and an unknown chemical on their leg and immediately experienced a burning sensation. The employee was hospitalized with a chemical burn and required surgery.
An employee was on a ladder disconnecting a 1-inch hose, known to have last carried acrylic acid that had been drained. When the hose was disconnected, residual acid dripped onto the employee's shoulder/arm area, causing a second-degree chemical burn.
Employees were removing scaffolding that was used to repair an ion exchange tank. The line was undergoing the regen process when a piece of scaffold struck a PVC pipe that transported hydrochloric acid (HCl). The injured employee was placing material inside a scaffold rack when he was sprayed in the face with HCl and sustained chemical burns to his eyes, face, chest, right arm, and left leg.
More severe injuries in this industry (NAICS 333318)
An employee was pushing metal sheets through a plate roller when the roller caught his gloves and his hands were pulled into the roller. The employee was hospitalized and required surgical amputation of two fingers on his left hand and surgery on two fingers on his right hand.
An employee was prepping a dip pot for cleanout. He was moving a utility cart into position. While moving the dip pot onto the cart, hot weatherstripping product spilled out of the pot and onto the employee's hand. The employee sustained burns to his left hand and wrist requiring hospitalization.
An employee was forming a part to put in the bin when her hand became caught in the die of the press. Two fingers were crushed. The employee sustained amputations of their right index and middle fingers at the joint closest to the fingertips.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.