Pedestrian struck by vehicle or object propelled by another vehicle in nonroadway area · Multiple surface and flesh wounds
At a glance
Federal OSHA recorded a severe workplace injury
at Ashley Furniture Industries, LLC, One Ashley Way, ARCADIA, WISCONSIN 54612
on — Multiple surface and flesh wounds, affecting the Head and extremities.
Final narrative
On September 13, 2024, the injured employee was walking through an aisle where a co-worker was removing pallets from the racking system using an order picker. The corner of a pallet being moved contacted the corner of a skid next to it, causing two empty pallets to fall 12 to 16 feet from the racking onto the injured employee. The employee sustained a laceration and contusions to the back of their head and left shoulder.
Hospitalized Head and extremities Forklift, order picker, platform truck powered
More severe injuries at Ashley Furniture Industries, LLC
An employee was unloading a trailer onto a dock when they stepped and fell into the space between the trailer and the dock. The employee sustained a lower right leg fracture.
On January 23, 2023, an employee was setting up a press roller for applying glue to boards when her right ring finger became pinched between the frame and the movable non-motorized outfeed platform. The finger was amputated just below the top knuckle.
On August 11, 2022, at 6:04 AM, an employee was clearing a jam in a wood grinding machine when a flash fire occurred causing second-degree burns to the employee's right arm, from the elbow to the fingertips.
An employee was cleaning fiber off a roller drive belt. The employee's left index fingertip got caught where the roller drive belt meets the belt wheel resulting in amputation of the fingertip.
The injured employee was walking through the warehouse. Another associate was driving a forklift with a pallet of large format tile (slabs) when the slabs began to tip. The injured employee ran over to stop the slabs from falling, but the slabs fell on his lower left leg/foot. The employee sustained fractures in his lower leg and foot. He was hospitalized and required surgery.
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
An employee was helping offload an aircraft. She was standing in the opening between a parked cart and an unoccupied aircraft tug when another vehicle struck a stationary bag cart, which then struck her. The employee suffered a skull fracture near the right eye, a right kneecap fracture, a nose fracture, and sinus damage, as well as soft tissue damage to the left calf and hip. She was hospitalized and required surgery.
An employee was cutting steel channels from a hanging rack that was being supported by a forklift. When they were finished, the forklift started moving the rack out of the area and a piece of material snagged one of the rack legs, causing the rack to tilt backward. The rack slipped off the forklift and struck the employee on his right side/lower back. He sustained a fractured pelvis and was hospitalized.
The injured employee was standing by one of the stationary computers along the wall. There was a half-pallet located approximately 3 feet behind the employee that consisted of 12-pound boxes stacked six boxes high. A forklift was transporting a pallet that came in contact with the stationary pallet behind the injured employee, causing four boxes to fall and contact their legs. The injured employee was hospitalized with leg injuries.
More severe injuries in this industry (NAICS 337121)
An employee was operating a panel saw. The machine malfunctioned and the employee went behind it to try and fix it. When he adjusted a valve, the machine activated and moved forward trapping him between the beam and the wood preparing to load. The employee sustained fractured ribs and injury to the abdomen and chest areas.
An employee was cutting wood parts on a band saw. The saw cut her left index finger at the knuckle closest to the palm and the employee sustained an amputation to the left index finger.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.