105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Plymouth Tube Company

Struck by running powered equipment during maintenance, cleaning, testing · Amputations involving bone loss

Federal OSHA recorded a severe workplace injury at Plymouth Tube Company, 2056 Young Street, EAST TROY, WISCONSIN 53120 on — Amputations involving bone loss, affecting the Other finger(s) n.e.c..

Watch Plymouth Tube Company — free Get an email when a new federal OSHA severe-injury report for Plymouth Tube Company is published. One employer, no account, unsubscribe in one click.

An employee was unjamming a die with a pry bar during a die change on a pointer machine. The machine cycled and the die crushed their left hand fingers. The employee sustained an amputation to their middle finger, a partial amputation to their ring finger, and a crushed index finger.

Amputation Other finger(s) n.e.c. Metal, woodworking, and special material machinery unspecified

Plymouth Tube Company

An employee was opening a valve on an acid prep tank. The pipe fitting was loose and acid sprayed the employee, burning the employee's upper body.

Plymouth Tube Company

An employee slipped on ice in the parking lot of the facility and fell resulting in a bruised lung and fractured ribs.

PLYMOUTH TUBE COMPANY

While an employee was inspecting tooling in the storage rack, the lid closed on his hand and smashed his pinky finger, resulting in an amputation.

Plymouth Tube Company

An employee was performing a quality test on some small pipes and was putting the tubes in a hydraulic ram press. A three-inch disc was projected from the press, lacerating and injuring the employee's head. The employee was hospitalized.

View Plymouth Tube Company's full OSHA safety record →

Envelope Seal Insulation, Inc

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

CFL USA, LLC

A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.

Bull Moose Tube

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.

US Battery Manufacturing Company, Inc

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Vallourec Star, LP

An employee fell onto a hot billet and suffered a burn to the left leg. The employee was hospitalized.

The Tube Fabrication Company, Inc.

An employee was cutting wooden boards using a table saw when the glove on his left hand was caught by the blade, resulting in a partial fingertip amputation.

Hanna Steel Corporation

An employee was placing a board on top of a bundle of steel tubing. A crane was moving a bundle of steel that struck the employee and caught them against another bundle of steel tubing. The employee sustained a crushing injury and hematoma to the right upper leg.

Bull Moose Tube Company

A crane was hoisting a pipe. An employee was adjusting twisted lifting chains on the end of the pipe when the pipe was raised, causing the employee's hands to be caught between the chains and the pipe. The employee suffered injuries to the left index finger, left ring finger, right ring finger, and right index finger; the right index fingertip was amputated without bone loss.

Tex-Tube Company

During a routine inspection, an employee placed their hand on a pipe to check a weld. The pipe clamp activated, closed on the pipe, and trapped the employee's right middle finger, resulting in a partial amputation and fracture to the fingertip as well as a laceration to the ring finger.

RG Professional Carpenter, Inc.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

General Thermodynamics, Inc.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Asher Enterprises, Inc.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

Consolidated Electrical Distributors Inc.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.