Struck by running powered equipment during maintenance, cleaning, testing · Nonfatal 'crushing' injuries
At a glance
Federal OSHA recorded a severe workplace injury
at Advanced Industrial Services, Inc., 295 Brown Street, ELIZABETHTOWN, PENNSYLVANIA 17022
on — Nonfatal 'crushing' injuries, affecting the Other finger(s) n.e.c..
Final narrative
An employee was replacing the auger inside an open mixer. When the auger was set inside the outer shaft, it moved back into place, dropping down approximately 2 to 4 inches. The employee was still holding onto the auger, and his left little finger was crushed.
Hospitalized Other finger(s) n.e.c. Agitators, mixers earth, mineral
More severe injuries at Advanced Industrial Services, Inc.
An employee was using a pedal-activated form roller. The employee was preparing to feed a piece of metal into the form roller, holding the metal above the machine when he inadvertently actuated the foot pedal. His glove got caught in the rollers, and his hand was pulled into the rollers.
A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
More severe injuries in this industry (NAICS 238290)
An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.
An employee was assisting with cutting a vertical steel pile. A 16-foot by 9-inch section of pile dropped to the side and bounced off a previously cut pile and toward the employee. The employee was struck in the torso and leg, causing his knee to dislocate from his femur. The employee was hospitalized.
On July 30, 2025, an employee was utilizing a circular saw to cut plastic into strips that would be used as shims. The blade of the saw amputated his left little finger to the second knuckle.
An employee was working on the ingot loader of a aluminum processing machine and noticed a pin was not installed. The employee reached to retrieve the pin and the machine activated for a functions test. The machine closed on the employee's hand, resulting in a hand injury requiring hospitalization.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.