Keith Huber Corporation

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.

An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.

An employee was rigging I-beams. An I-beam slid off the stack of I-beams and fractured the employee's leg.

An employee was standing on a 10-inch high working platform (36.75"x24"x10") verifying that tanks were being picked up properly by an overhead conveyor. The employee turned and was stepping off the platform when their left work boot caught the edge of the platform. The employee fell to the concrete floor and landed on their right side. The employee's right hip was fractured.

An employee was working on a vessel, attaching the base plate ring to the legs, when the base plate shifted about 3 inches. The employee's right foot became pinned between the base plate and the floor. Three toes were crushed. The employee was hospitalized and required surgery, resulting in partial amputation of their toe tips.

Two employees were constructing a 30-foot-tall aboveground storage tank, fitting a double roof on the tank. Half of the roof had been stitch-welded to the tank, and the employees were fitting/tacking down the second half of the roof, when the roof shifted and fell in. One employee fell and sustained fractures to their right foot and shin. The second employee suffered a broken back. Both employees required hospitalization.

An employee was removing stretch wrap from between shipping pallets when she tripped/stumbled and fell, resulting in a fractured hip.

Two employees engaged in a verbal altercation. The injured employee was punched in the face and fell, hitting their head on the concrete floor. The employee sustained a brain bleed and blunt force trauma to the face.

An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.

The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.

An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.

An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.

An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.