Struck by rolling powered vehicle or machinery · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Shaw's Supermarkets, Inc., 205 Spencer Drive, WELLS, MAINE 04090
on — Fractures , affecting the Leg(s) unspecified.
Final narrative
An employee was moving material with a powered pallet jack. The employee was caught between the jack and shelving, suffering a broken leg.
Hospitalized Leg(s) unspecified Non-riding pallet jack
An employee was collecting and moving shopping carts in a parking lot. A car hit the carts, which fell onto the employee. The employee suffered an injured left leg that required surgery and hospitalization.
An employee was struck by a car in the store parking lot. They were struck in the hip and the car ran over their foot, resulting in fractures requiring hospitalization and surgery.
An employee was was exiting a car they were detailing when a malfunction caused it to move. The employee was pinned between the car door and a pole, suffering a lower left leg fracture and crushing injuries.
An employee was operating a tug that had been re-tagged due to faulty brakes. As the employee approached the designated parking area, he slowed the tug using the clutch and then exited the tug. He went to stop the tug from colliding with a concrete wall when his right ankle became caught between the tug and a parking stall barrier. He sustained a fractured ankle and was hospitalized.
An employee was on a tugger. He was backing up to pick up a stack of pallets. While aligning the tugger with the pallets, his left leg was caught and broken between the tugger and a storage rack.
An employee was operating an electric pallet jack. While standing beside the equipment, the pallet jack lurched forward, pinning the employee's leg against racking. The employee was hospitalized with a fractured right ankle.
More severe injuries in this industry (NAICS 493110)
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
An employee was operating an extruder and performing a spool swap over from the right spindle to the left spindle. After rewiring the new spool, the employee's clothing got caught in the turning shaft when the left spindle started back up. The employee's left arm was pulled into the machine, resulting in a fractured humerus and lacerations to her triceps. She was hospitalized and required surgery.
An employee was resetting a warehouse racking system utilizing an order picker. They fell approximately 5 feet from the order picker to the concrete floor and sustained fractured ribs.
A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.
Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.
An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.
An employee was standing on a step stool, removing the nuts and bolts from the frame of a solar panel that was being replaced. The employee's cheek made contact with a connector with damaged insulation. The employee was shocked, briefly lost consciousness, and fell to the ground, suffering an injury to the left shoulder.