Struck by running powered equipment during maintenance, cleaning, testing · Fractures and surface, flesh wounds
At a glance
Federal OSHA recorded a severe workplace injury
at J. R. Simplot Company, 16733 Simplot Blvd, CALDWELL, IDAHO 83607
on — Fractures and surface, flesh wounds , affecting the Leg(s) unspecified.
Final narrative
An employee was realigning a "rover cart" on a track when they were struck from behind by a "rover cart" on a different track. The employee sustained a fractured right leg with a punctured vein.
Hospitalized Leg(s) unspecified Material handling and warehousing machinery unspecified
An employee was on horseback roping a calf to be branded. The horse jumped and the employee fell to the ground. The employee was hospitalized for multiple broken ribs.
A crew was preparing a 20-foot section of 12-inch high-density polyethylene (HDPE) pipe to be swung into a welder using an excavator, where it would be welded onto a longer run of pipe. One employee was facing the longer pipe in the welder while the 20-foot section was being rigged. The 20-foot section moved and struck the employee's left knee. The employee's left leg was broken below the knee.
An employee was struck by a car backing up in the parking lot, resulting in broken bones in the leg and a severed artery. The leg was medically amputated above the knee.
An employee was checking a shredder machine to ensure it was clean. Their fingers were caught and crushed inside the machine resulting in an amputation.
An employee was on an extension ladder, using wire cutters to remove zip ties from a pivot to unroll the drop hose. The ladder shifted/slid on the pivot piping and the employee fell to the corn field ground/corrugate. The employee sustained lacerations to their liver and kidney. They also sustained fractures to both wrists and the left trochanter and required surgery.
A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
More severe injuries in this industry (NAICS 311411)
An employee was troubleshooting to determine why a pallet was not traveling along a continuous vertical conveyor. The conveyor's rollers caused a crushing/laceration injury to the employee's right hand that required surgery.
An employee was operating a pallet end rider when it struck a rack. The employee's right foot was pinned and fractured between the forklift and the rack.
An employee was putting a machine guard back onto a chain and sprocket when their left middle finger became caught in the chain and sprocket. The employee sustained an amputation of the fingertip.
An employee was changing out a hose on a chemical tote. The fitting for the tote disengaged and the employee was exposed to peracetic acid that caused chemical burns and respiratory distress.
An employee was helping to dismantle an old piece of equipment (descrambled bottle machine) when a metal plate fell and pinched his left middle finger against the wall. The employee sustained a severe laceration that required surgery and amputation.
An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.
An employee was standing on a multi-purpose ladder installing head flashing over a window. Their feet were approximately 6 feet off the ground and three rungs from the top. The employee lost their grip on the drill they were using and the ladder tipped over. The employee fell from the ladder to the ground, resulting in a fractured left wrist, bruised chest, and lacerations to their face and lip.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
An employee was loading a 4-inch wooden door into a pickup truck when he felt a pop in his right side behind his shoulder blade. He was hospitalized later that day and underwent surgery, having suffered a collapsed right lung.