Federal OSHA recorded a severe workplace injury
at Kamps, Inc, 13 South Industrial Park Road, MILTON, PENNSYLVANIA 17847
on — Fractures , affecting the Foot (feet), toe(s) unspecified.
Final narrative
An employee was operating a forklift to place two empty pallets onto a stack of empty pallets that was approximately 7.5 feet high. The employee placed the pallets on the stack, backed up, and then turned the wheel prior to lowering the forks. The forklift tipped over onto its left side. The employee's left foot became caught between the forklift and the concrete floor, resulting in hospitalization with a fractured foot.
An employee was operating a bubble wrap production line. He was splicing the ends of the film rolls together with tape when a driven roll contacted his hand. His hand and arm were pulled into the machine up to his shoulder. The employee's forearm contacted the the hot surface (230-500 F) of the bubble stamping cylinder. He was hospitalized with burns to the forearm that required surgery and crushing injuries to the hand and forearm without fractures.
On January 2, 2024, the injured employee was working in a production area. He stepped down from a step stool and a forward moving forklift struck his left leg. The employee was hospitalized with a fractured left tibia and fibula, and a puncture to the left foot.
On August 24, 2023, an employee was at a pallet repair table unjamming a portable nail gun. The nail gun discharged the jammed nail, striking the employee's left hand. They were hospitalized.
An employee was mowing a residential lawn at a client's house. The mower slid on the land and tipped over onto him. The employee was hospitalized with a fractured vertebra in the neck and partial paralysis.
An employee was driving a forklift when its right front wheel dropped off a 6-inch curb. The forklift rolled over and trapped him against the concrete surface. He suffered a broken pelvis, ribs, and collarbone, as well as a collapsed lung.
An employee was operating a utility task vehicle (UTV). During a left turn, the vehicle rolled over on its right side. The employee suffered a lumbar strain and fractures to four lower-back vertebrae. She was hospitalized.
An employee was loading a telehandler onto a trailer and the right wheels were misaligned with the trailer, causing the telehandler to tip and fall to the right. The employee went to exit the telehandler as it fell, striking his head on the cage and frame of the telehandler. The employee sustained a concussion, a head laceration, and fractured vertebrae.
An employee was driving an ATV when it overturned and rolled onto its side. The employee sustained a fractured elbow requiring hospitalization and surgery.
More severe injuries in this industry (NAICS 321920)
An employee was cutting wood with a miter saw when their clothing was pulled into the blade, resulting in a bicep laceration. The employee was hospitalized. The blade cover was not in place at the time of the incident.
Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.
An employee was operating a bubble wrap production line. He was splicing the ends of the film rolls together with tape when a driven roll contacted his hand. His hand and arm were pulled into the machine up to his shoulder. The employee's forearm contacted the the hot surface (230-500 F) of the bubble stamping cylinder. He was hospitalized with burns to the forearm that required surgery and crushing injuries to the hand and forearm without fractures.
An employee was operating a pallet dismantling saw. A board became stuck, and the employee tried to pull the pallet. When the board broke, the employee's right hand made contact with the blade, resulting in the amputation of the right middle finger above the second knuckle.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.