Ace Wire & Cable Co, Inc.

An employee was diagnosing the cause of a rear light malfunction on a forklift when the reverse gear engaged. The forklift moved backward and contacted the employee causing a metatarsal fracture in their left foot and injury to their lower right leg.

An employee was collecting shopping carts in the parking lot when he was struck by a customer's truck as it was backing out of a parking spot. The truck pinned the employee's left leg against the cart mule they were using. The employee was hospitalized with a fractured leg and required surgery.

An employee was working with paving equipment and heard a noise on the opposite side of the machine he was working on. When the machine stopped, the employee went to the opposite side and crouched down to investigate the noise. A mini track loader backed up and drove over the employee's leg. The employee sustained fractures to their lower leg, ankle, and foot.

An employee took a picture of the seal and license plate on a delivery truck after loading. The truck then reversed back to the dock and pinned the injured employee against the dock. The employee sustained an abdominal fracture.

An employee was between a milling machine and an 18-wheeler belly dump when the 18-wheeler backed up and ran over his feet and legs. The employee was caught between the front of the milling machine and the truck. The employee sustained fractures to their hip, leg, and feet.

An employee was installing a fuse in a machine cabinet. An arc flash burned the employee's left arm, and the employee was hospitalized.

An employee was standing on the back of a flatbed truck while a forklift was being used to load a shelving unit onto the truck. The shelving unit slid off and struck the employee, who suffered contusions to the head and collarbone area.

An employee was operating an order picker that was raised 20 inches when they stepped backward and fell off the platform to the concrete floor. The employee struck their head on the floor, resulting in hospitalization with a head injury.

An employee was operating a side loader designed for narrow aisles to pick up pans filled with steel, which include 12-foot pans and others with 20-24 foot pans. The employee pulled the required amounts from the pans using a crane, and then packed and labeled the items for shipment to the loading dock. The side loader struck a pan, causing the cab to detach and land on the employee's leg, resulting in a fracture.

A delivery driver was helping a customer unload a strut. The banding around the strut broke loose and lacerated the employee's lower left leg. The employee was hospitalized and required stitches and surgery to repair the patellar tendon.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.