Caught or wedged between objects nonrunning · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Anniston Army Depot, 7 Frankford Ave, ANNISTON, ALABAMA 36201
on — Fractures , affecting the Arm(s) unspecified.
Final narrative
An employee was installing a combat vehicle turbine engine to a dynamometer stand in a dynamometer test engine cell. While lining up the turbine engine to the stand, the employee's left arm was fractured between the engine and the face of the stand.
Hospitalized Arm(s) unspecified Multiple engine and mechanical parts, whole engine
An employee was rigging the front of a heavy armored vehicle to offload from a railcar. The employee's right middle and index finger were caught between the rigging hook and the vehicle's engine cover latch hook, causing the amputation of flesh from both fingers.
An employee was securely elevated in a bucket truck when they received an electrical shock from a high-voltage power line. The employee fell down in the bucket after he sustained the shock. The employee then stood up and his basket was lowered to the ground. The employee was hospitalized with burns to both arms and hands.
An employee was pulling on a stackable metal bookshelf while a second employee was pushing it. The first employee slipped and fell to the floor, fracturing the T12 vertebra and requiring hospitalization.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.
More severe injuries in this industry (NAICS 336112)
An employee was walking on the top deck of a fire truck that was being assembled. The employee lost their balance and stepped on open, horizontally hinged doors, which could not support their weight. The employee fell 6 feet to the concrete floor and suffered fractures to their elbow and pelvis.
An employee was assessing an overhead stamping press door for alignment issues when the counterbalance moved and their left thumb was caught between the chain and the sprocket. The thumb was amputated. The door was locked out/tagged out at the time but gravitational pull was not controlled.
An employee was performing a bubble test (pressure test) on a pipeline to locate a leak when the joint elbow that was producing the leak detached and struck him. The employee sustained fractures to a rib and clavicle, as well as injuries to his spleen and lung.
An employee was operating a forklift to retrieve a stack of empty containers from behind a weld cell. The forklift grabbed the stack. Then the forks tilted back, causing the top container to fall onto the forklift cage. The employee got off the forklift and went to pull the container down. The container fell on the employee's head and leg, resulting in a bump to the head and a fractured right leg.
An employee was using a hydraulic tool to spread a large metal mounting bracket on an equipment box on a fire truck. Excessive pressure caused an explosion and metal struck the employee in the face. The employee was hospitalized with a broken nose and cheekbone as well as damage to one of his eyes.
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.