Struck by dislodged or detached object(s) · Multiple severe wounds and internal injuries
At a glance
Federal OSHA recorded a severe workplace injury
at LCT Tech America, Inc., 1 G Rd, ELLABELL, GEORGIA 31308
on — Multiple severe wounds and internal injuries, affecting the Trunk and other upper extremities.
Final narrative
An employee was performing a bubble test (pressure test) on a pipeline to locate a leak when the joint elbow that was producing the leak detached and struck him. The employee sustained fractures to a rib and clavicle, as well as injuries to his spleen and lung.
Hospitalized Trunk and other upper extremities Pipes, ducts, tubing unspecified
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
A service crew was pulling a pump and motor from a well. After breaking a joint of pipe loose from another joint, an employee grabbed the chain tongs to prevent the pipe from spinning in the well, so the crew could continue taking it apart. The bolt that attaches the chain to the handle of the chain tongs broke, causing the chain to swing around and strike the employee's lower right leg. The chain severely punctured his leg and fractured his tibia.
An employee was using a handheld grinder to cut a bolt. The grinding wheel broke apart and a fragment struck the employee s right hand, causing a laceration to the palm near the little finger.
An employee was operating a brake press when the top die broke, causing the bottom die to roll out and onto the employee's legs. Both of the employee's legs were crushed below the knee, and both legs were partially amputated. The employee's left leg was also fractured above the knee.
A pressurized aircraft nose landing gear strut assembly was being disassembled. The gland nut dislodged under pressure and made contact with an employee's left hand, breaking it.
More severe injuries in this industry (NAICS 336112)
An employee was walking on the top deck of a fire truck that was being assembled. The employee lost their balance and stepped on open, horizontally hinged doors, which could not support their weight. The employee fell 6 feet to the concrete floor and suffered fractures to their elbow and pelvis.
An employee was assessing an overhead stamping press door for alignment issues when the counterbalance moved and their left thumb was caught between the chain and the sprocket. The thumb was amputated. The door was locked out/tagged out at the time but gravitational pull was not controlled.
An employee was installing a combat vehicle turbine engine to a dynamometer stand in a dynamometer test engine cell. While lining up the turbine engine to the stand, the employee's left arm was fractured between the engine and the face of the stand.
An employee was operating a forklift to retrieve a stack of empty containers from behind a weld cell. The forklift grabbed the stack. Then the forks tilted back, causing the top container to fall onto the forklift cage. The employee got off the forklift and went to pull the container down. The container fell on the employee's head and leg, resulting in a bump to the head and a fractured right leg.
An employee was using a hydraulic tool to spread a large metal mounting bracket on an equipment box on a fire truck. Excessive pressure caused an explosion and metal struck the employee in the face. The employee was hospitalized with a broken nose and cheekbone as well as damage to one of his eyes.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.