Exposure to electric arc · Thermal burns degree unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Quantum Technology, 15555 Cutten Rd., BALA CYNWYD, PENNSYLVANIA 19004
on — Thermal burns degree unspecified, affecting the Multiple body parts unspecified.
Final narrative
On 2/26/2025, at approximately 9:30 AM, an employee was removing an electrical fixture when he received an electrical shock. An arc flash caused his clothes to catch on fire, resulting in burns to 40% of his body.
Hospitalized Multiple body parts unspecified Electric parts unspecified
An employee was terminating cables in a junction box. A loose ground wire came into contact with the bushing, causing a flash that burned the right side of the employee's face and his right hand.
An employee was using a bucket truck hoist to raise secondary aerial wiring. The wire made contact with the primary wire, causing an arc flash. The employee suffered burns to both hands and was hospitalized.
A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee was cutting wire when his gloved left hand got pulled into the counter on the wire machine resulting in amputation of his left little finger and a laceration to his right ring finger.
An employee reached under a raised truck to pull on the spare tire when the jack slipped, causing their hand to be caught between the fallen truck and the spare tire. The employee was hospitalized with a severe injury to the right hand.
An employee was replacing a hydraulic cylinder on a mini-excavator. The employee was positioning the machine while it was in a trailer when their right leg became pinned between a track and the trailer, resulting in severe lacerations to the lower leg.
An employee was using an 8-foot folding ladder to retrieve a 250-foot coil of wrapped wire on a shelf. The employee dropped the wire which struck the ladder, causing the employee to fall from the ladder to the concrete floor. The employee sustained a skull fracture, a right knee fracture, and a rib fracture.
Four employees were moving a wooden spool of fiber-optic cable fiber when the injured employee slipped and fell, twisting his ankle. The employee suffered three fractures to his ankle.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.