Sysco Northern New England

An employee was descending a 10-foot A-frame ladder. The ladder came out from under the employee when he was about 5 to 6 feet above ground level. He fell, landed on the left side of his body, and sustained fractures to four ribs, his pelvis, and hip socket, and sustained injuries on the left side of his body. The employee was hospitalized.

An employee was handling a small platform ladder with three steps and two wheels in the front. The employee was found on the floor underneath the ladder. She was hospitalized with multiple fractures to the sacrum.

An employee was on a ladder four feet above the ground to install insulation. The ladder began to slide and the employee jumped to the shop floor, breaking his left tibia and fibula at the ankle. He was hospitalized, requiring surgery.

An employee's leg went through a part of the floor that was missing a floor tile and he sustained a dislocated shoulder while catching himself.

On July 21, 2025, an employee was working from a 10-foot step ladder while installing a 3-by-5-foot glass window pane on the outside of a new home under construction. The window fell from the frame and the employee went to catch it when the ladder slipped. The employee fell 5 feet to the ground and landed on small pieces of concrete left over from the foundation pour. The employee was hospitalized with a dislocated elbow and fractured wrist that required surgery.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was making a delivery in a truck. As he exited the truck, he fell on a step and then to the ground, resulting in a fractured tibia.

An employee was picking items from the freezer section of the warehouse. When he stepped down onto the floor, he turned on the planted foot, and felt a "pop" and pain in his knee. The employee was hospitalized with a dislocated knee and two torn tendons. He required surgery to repair the tendons.

An employee was operating an electric pallet jack when it pinned his right ankle against some racking. The ankle was broken and he was hospitalized.

At 7:40 a.m. on October 3, 2025, an employee was unloading a bulkhead at a dock door. As he pulled the bulkhead out of a trailer, its plastic lip caught on the dock plate, causing the employee to fall and twist his left leg, knee, and hip. The hip was broken and he was hospitalized, requiring surgery.

A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.

Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.

An employee was using a metal shear when it amputated the tip of his right index finger.

An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.

An employee was standing on a step stool, removing the nuts and bolts from the frame of a solar panel that was being replaced. The employee's cheek made contact with a connector with damaged insulation. The employee was shocked, briefly lost consciousness, and fell to the ground, suffering an injury to the left shoulder.