Pike Electric West

An employee was operating an asphalt grinding machine when a branch got in the way of the machine. He crawled on top of the machine to cut the branch but it snapped back and knocked him off the equipment. He fell approximately 10-12 feet to the ground below, resulting in fractures to both wrists and forearms, and a left knee fracture.

A temporary employee was on a ladder while cutting conduit on a new building using a reciprocating saw. They sustained an electrical shock from a live electrical cable. The employee fell backward approximately 6 feet to the ground, resulting in hospitalization with a fractured heel that required surgery.

An employee was working on the ninth position of a 12-foot ladder, installing a new light fixture in an existing building. The employee sustained an electrical shock, lost his balance on the ladder, and fell. He sustained a fracture of the lower back and bruises on his hand and foot. The fracture required surgery.

At approximately 10:00 AM, employees were conducting asphalt loading operations. While securing a hose atop a truck, an employee encountered a malfunction involving a plugged hose. Pressure built up within the hose and suddenly released, causing the hose to fly off the truck. The hose contacted two employees and both employees fell approximately 7 feet. Employee 1 was on top of the truck and sustained three fractured ribs and a head contusion. Employee 1 was hospitalized. Employee 2 was climbing a ladder on the truck and sustained a fractured right leg. Employee 2 was not hospitalized.

An employee was working from a ladder, installing light fixtures. The employee was shocked and fell from the ladder to the floor about 6 feet below, striking their head and back. The employee was hospitalized with a laceration to the head and broken vertebrae.

An employee was performing troubleshooting and maintenance on one of the generators that feed the RF line for glue-laminated timber (glulam) beam production. He was reattaching the outer panel of the generator. A circuit was completed and the employee was electrocuted by the generator and sustained burns. The employee was hospitalized.

An employee was utilizing a utility task vehicle (UTV) to patrol a 138 kV transmission line in a right-of-way. The UTV drove into a washout hole that was approximately 6 feet deep and obstructed by vegetation. The employee sustained a dislocated shoulder, a fractured left humerus, back pain, and a strained ankle. He was hospitalized.

A crew of employees were working to replace a utility pole that was broken by a motor vehicle accident. As the crew was removing equipment from the broken pole, part of the pole broke, fell on the injured employee, and rolled over him. The employee sustained two broken shoulders, multiple broken ribs, and a damaged lung that required hospitalization and surgery.

An Ameren lineman was making secondary voltage connections in a pad-mounted residential feed transformer. The lineman contacted an energized lead bushing, sustained an electrical shock, and was hospitalized.

An employee was checking voltage on a meter. There was an arc flash, and the employee suffered burns to both hands.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.