Sentry Electric, Inc. of Central Florida

An employee was operating an asphalt grinding machine when a branch got in the way of the machine. He crawled on top of the machine to cut the branch but it snapped back and knocked him off the equipment. He fell approximately 10-12 feet to the ground below, resulting in fractures to both wrists and forearms, and a left knee fracture.

A temporary employee was on a ladder while cutting conduit on a new building using a reciprocating saw. They sustained an electrical shock from a live electrical cable. The employee fell backward approximately 6 feet to the ground, resulting in hospitalization with a fractured heel that required surgery.

An employee was working on the ninth position of a 12-foot ladder, installing a new light fixture in an existing building. The employee sustained an electrical shock, lost his balance on the ladder, and fell. He sustained a fracture of the lower back and bruises on his hand and foot. The fracture required surgery.

At approximately 10:00 AM, employees were conducting asphalt loading operations. While securing a hose atop a truck, an employee encountered a malfunction involving a plugged hose. Pressure built up within the hose and suddenly released, causing the hose to fly off the truck. The hose contacted two employees and both employees fell approximately 7 feet. Employee 1 was on top of the truck and sustained three fractured ribs and a head contusion. Employee 1 was hospitalized. Employee 2 was climbing a ladder on the truck and sustained a fractured right leg. Employee 2 was not hospitalized.

On August 2, 2025, at 7:35 AM, a temporary employee was using an air hose to blow dust off the electric motor of a conveyor while standing on the belt. The conveyor started and the employee was taken through a plastic/trash trommel and out a discharge chute. The employee fell 8-10 feet and was hospitalized with a brain bleed and lacerations to the head that required stitches.

An employee was troubleshooting the control setup for a variable air volume box above a ceiling. The employee's hand came into contact with an exposed, energized 277-volt wire that had loosened from its terminal on the box's assembly. He was shocked and fell off a ladder. His left hand passed across the ceiling grid and was lacerated. He also suffered an electrical burn to the right hand and was hospitalized.

An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.

An employee was standing on an A-frame ladder approximately 6 feet above the floor while he attached a suspended light fixture to the ceiling. The employee lost balance, and fell to the tiled floor below, sustaining blunt force trauma to his head.

An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.

The injured employee was performing routine maintenance on a fan belt/pulley. The injured employee and another person were moving the pulley back and forth manually to find a bearing issue. The injured employee's left ring finger got caught between the belt and the pulley wheel, resulting in a soft tissue amputation.

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.